BASE-FILTER 3G0802 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-2082 Lifting Hook 1
B 6V-4876 Lubricant 1
Illustration 1 g02553959
Attach Tooling (A) and a suitable lifting device to piston pump (6). The weight of piston pump (6) is approximately 33 kg (73 lb).
Apply Tooling (B) to the splines of piston pump (6). Install the O-ring seal, piston pump (6), and bolts (7).
Install hose assemblies (4), the clamps, and the bolts to piston pump (6).
Connect hose assembly (3) to piston pump (6).
Connect harness assembly (5).
Illustration 2 g02553958
Install cover assembly (1) and bolts (2).
Illustration 3 g02553957
Raise the hopper and place the travel lock into the unlocked position. End By:
Install the hydraulic cylinder (tow point). Refer to Disassembly and Assembly, "Hydraulic Cylinder (Tow Point) - Remove and Install".
Install the tow arm. Refer to Disassembly and Assembly, "Tow Arm - Remove and Install".
Install the rear wheel. Refer to Disassembly and Assembly, "Wheel (Rear) - Remove and Install".