BASE 4N5084 - Caterpillar

Disassembly Procedure
Start By:
Remove the solenoid valve. Refer to Disassembly and Assembly, "Solenoild Valve (Auxiliary Circuit) - Remove".
Illustration 1 g01190451
Remove cap (1) and coil (2).
Illustration 2 g01190452
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove O-ring seal (3) and plunger (4).
Illustration 3 g01190453
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove O-ring seals (5) and backup rings (6).
Remove plug (11), spring (10), washer (9), spool (8), and rod (7).
Illustration 4 g01190454
Remove spring (12).
Illustration 5 g01190455
Remove plugs (13) and spool (14).
Illustration 6 g01190557
Remove backup rings (15) and O-ring seal (16).