BASE ASSEM. 5H2993 - Caterpillar

When the words "use again" are in the description, the specification given can be used to determine if a part can be used again If the part is equal to or within the specification given, use the part againWhen the word "permissible" is in the description, the specification given is the "maximum or minimum" tolerance permitted before adjustment, repair and/or new parts are needed.A comparison can be made between the measurements of a worn part and the specifications of a new part to find the amount of wear. A part that is worn can be safe to use if an estimate of the remainder of its service life is good. If a short service life is expected, replace the part.Reference: For complete Specifications with illustrations, Systems Operation and Testing and Adjusting procedures, make reference to D4H Tractor Service Manual, SENR3115 and D5H Tractor Service Manual, SENR3250 For complete Winch information for the D4H Track Grapple Skidder, make reference to SENR3372 for Specifications and SENR3373 for Systems Operation, Testing and Adjusting procedures. (508 Skidder) For complete Winch information for the D4H Track Cable Skidder, make reference to SENR3128 for Specifications, Systems Operation, Testing and Adjusting procedures. (54 Winch) For complete Winch information for the D5H Track Grapple Skidder, make reference to SENR4083 for Specifications, Systems Operation, Testing and Adjusting procedures. (518 Skidder) For complete Winch information for the D5H Track Cable Skidder, make reference to SENR3128 Specifications, Systems Operation, Testing and Adjusting procedures. (55 Winch)