BASE AS 5T4729 - Caterpillar

Personal injury or death can result if two persons are not used in the following procedure.
Introduction
This information includes the following test:
Limit Switch (Stop Light) This information includes the following adjustment:
Limit Switch (Stop Light)Required Tools
Table 1
Required Tools    
Quantity     Part Number     Description    
Use As Required         Shim
3.5 mm (0.14 inch)    
Use As Required         Shim
1.5 mm (0.060 inch)    Test Preparation
Illustration 1 g03520375
Steering Frame in the locked position
Move steering frame lock to the LOCKED position.
Move the machine to a hard, level surface. The surface must also be dry and free of debris.
Engage the parking brake. Turn the ignition switch to the OFF position.Test Procedure
Illustration 2 g01131873
(1) Plug. (2) Adjustment screw.
Illustration 3 g01131969
Side view of the right service brake pedal (3) Pedal stop. (4) Treadle heel stop.
Move the machine to a hard, level surface. The surface must also be dry and free of debris. Engage the parking brake. Turn the ignition switch to the OFF position.
Ensure that there is no interference with other components when both of the brake pedals are applied and released. When both brake pedals are in the released position,