7S8703 BASE ASSEM. Caterpillar parts
941
Rating:
Alternative (cross code) number:
CA7S8703
7S-8703
7S8703
CA7S8703
7S-8703
7S8703
Weight: 10 pounds 4 kg.
TRACK LOADER,
Compatible equipment models: 7S8703:
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change". Drain the cooling system until the level of the coolant is below the exhaust manifolds.
Illustration 1 g03323651
Remove tube assembly (1) and elbow (2) from the water temperature regulator housing.
Illustration 2 g00602197
Typical example
Attach Tooling (A) and a suitable lifting device to water temperature regulator housing (4). Remove bolts (3). Remove water temperature regulator housing (4).
Illustration 3 g00602198
Remove water temperature regulators (5). Remove gasket (6). Visually inspect ferrule (7) and the seals for water temperature regulators (5). Obtain new parts for assembly, if necessary.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change". Drain the cooling system until the level of the coolant is below the exhaust manifolds.
Illustration 1 g03323651
Remove tube assembly (1) and elbow (2) from the water temperature regulator housing.
Illustration 2 g00602197
Typical example
Attach Tooling (A) and a suitable lifting device to water temperature regulator housing (4). Remove bolts (3). Remove water temperature regulator housing (4).
Illustration 3 g00602198
Remove water temperature regulators (5). Remove gasket (6). Visually inspect ferrule (7) and the seals for water temperature regulators (5). Obtain new parts for assembly, if necessary.
Caterpillar parts catalog:
Parts base Caterpillar catalog:
8S0268
BASE ASSEM.
951B
951B
7S8659
BASE ASSEM.
D5, D5B
D5, D5B
5M0474
BASE ASSEM.
12E, 561B, 955H, D4D
12E, 561B, 955H, D4D
7M2750
BASE ASSEM.
561B, 561C
561B, 561C
4H6724
BASE ASSEM.
140, 153, 8B, 9B, D4E
140, 153, 8B, 9B, D4E
4S9866
BASE ASSEM.
594H
594H
4S9121
BASE
D5, D8H
D5, D8H
8M4241
BASE ASSEM.
16, 631C, 657, 657B, 824B, 983, 988
16, 631C, 657, 657B, 824B, 983, 988
7S6637
BASE ASSEM.
561C, 941, D4D, D6C
561C, 941, D4D, D6C
2J8977
BASE
184
184
4S8634
BASE AS-OIL PUMP
941, 951B, D4D
941, 951B, D4D