BASE AS 9N3668 - Caterpillar

Screens for "SYSTEM INFORMATION"
Illustration 1 g00926347
Marine Power Display
(1) Marine Power Display
(2) Button for alarm
(3) Button for screen display
(4) Button for next screen
(5) Button for previous screen
Illustration 2 g00926263
(6) Screen for "SYSTEM INFORMATION"
(7) Button for "Menu"
(8) Screen for "CONTROL SYSTEM INFORMATION"
(9) Indicator type
(10) Indicators for the "Station Button Status"
(11) Indicators for the "Station Lamp Status" Screen for "SYSTEM INFORMATION"
Two screens for information are available: the screen for "SYSTEM INFORMATION" (6) and the screen for "CONTROL SYSTEM INFORMATION " (8). Pressing the button for "Menu" (7) will display the screen for "SYSTEM INFORMATION" or the screen for "CONTROL SYSTEM INFORMATION". By pressing the button for "Menu", the operator can change to the other screen.The screen for "SYSTEM INFORMATION" (6) is the first screen that is displayed. This is the default screen. The Marine Power Display (MPD) (1) will retain the screen for information that was displayed last until the keyswitch is turned OFF. When the keyswitch is turned OFF a reset will occur. The default screen will appear first when the keyswitch is turned ON.The screen for "SYSTEM INFORMATION" (6) will display the following information: current user name, "software part number", "software version for the ROM bootloader", unit "serial number", "Unit Location", "Engine Location", "Display Units" and vessel speed units.The indicators for the "Station Button Status" (10) and the indicators for the "Station Lamp Status" (11) indicate the state of the buttons and indicators of the active control panel.
Illustration 3 g00925883
(12) Display for parameter name
(13) Button for "Exit"
(14) Button for scrolling in the UP direction
(15) Button for scrolling in the DOWN direction
(16) Button for "Change User" Pressing the button for "Menu" will display the menu for the screen for "SYSTEM INFORMATION". On this screen, the button functionality is redefined as shown on the right side of the screen. See illustration 3. If a diagnostic code is active and the diagnostic code window is displayed on the screen, the button actions return to their normal definitions. Pressing the button for scrolling in the UP direction (14) or the button for scrolling in the DOWN direction (15) will cause the top menu item to scroll through the items to be changed. The top menu item is the button for "Change Screen". The following are the items that can be changed:
The screen that is displayed
"User Name"
"Unit Location"
"Display Units"
"Vessel Spd Units"The data that is selected will be displayed in reverse video. Pressing the button for alarm (2) will cause the specified parameter to scroll through each available value. For example, "Vessel Spd Units" would scroll through the following values: "Knots", "MPH" and "KPH". Pressing the button for "Exit" (13) returns the display to the screen for "CONTROL SYSTEM INFORMATION". Any data that was changed is saved to nonvolatile memory.Changing Parameters
"Change Screen"
Pressing the button for alarm (2) will cause the screen for "CONTROL SYSTEM INFORMATION" (8) to be displayed. This option is only available if the MPD has detected a power train control processor (PCP) on the CAN data link.Change "User Name"
Pressing the button for alarm (2) will