BASE AS.- 9U7526 - Caterpillar

Implement Control Levers
Float Detent (1) - Push the lever all the way forward to FLOAT DETENT to allow the implement to follow the ground contour. Cylinder Retract Detent (2) - Push the lever forward to the "CYLINDER RETRACT" position and release the lever. When the implement cylinder is completely retracted, the lever returns to HOLD. Hold (3) - Move the lever to HOLD to stop implement cylinder movement. Cylinder Extend Detent (4) - Pull the lever all the way back to the "CYLINDER EXTEND" position and release the lever. When the implement cylinder is completely extended, the lever returns to HOLD. Next to each implement control lever is a number (1-4) that indicates the hydraulic circuit it controls.Flow Controls
Flow Controls - Turn the knobs to adjust the rate of operation of the implement cylinders as desired. Turn the knob all the way counterclockwise for minimum oil flow. Turn the knob all the way clockwise for maximum oil flow. Next to each flow control knob is a number (1-4) that indicates the hydraulic circuit it controls.Power Takeoff Control Lever
Disengaged - Move the lever to position (2) to disengage and stop the power takeoff. Engaged - Move the lever to position (1) to engage the power takeoff. The power takeoff now operates.