BASIC HOUSIN 0787628 - Caterpillar

Table 1
OPERATION    
Warning Level     Action Alarm     Action Indicator    
Level 1     OFF     OFF    
Level 2     OFF     Flash ON and OFF    
Level 2S     ON     Flash ON and OFF    
Level 3     Pulse ON and OFF     Flash ON and OFF    The following is the recommended action for the machine operator in response to the different warning levels:Level 1 - The alert indicator for the system that is involved will illuminate. A Level 1 warning will indicate that the operator should be aware of a condition of one or more of the machine systems.Level 2 - The operation of the machine should be changed or maintenance should be performed to the machine. Possible damage to components on the machine may occur.Level 2S - In addition to the normal Level 2 Cluster warning, the audible alarm will be in a constant ON state.Level 3 - The machine needs to have an immediate, safe emergency engine shutdown. Possible injury to the operator or severe damage to components may occur.
Table 2
Event Codes for the Machine ECM    
EID    Warning Level    Description    Activation    
153     3     High speed directional shift     1. Ground speed is greater than 16 km/h (10 mph) and
2. A shift in direction is requested by the operator.
A "Shift in Direction" is defined as:
1. Shift from Fwd to Rev
2. Shift from Rev to Fwd
3. Shift out of neutral    
232     2     High Fuel/Water Separator Water Level     1. Water in Fuel switch is closed for more than 30 seconds.
2. Engine speed is greater than 400 rpm.    
282 (1)     2     Hydraulic Oil Filter Bypass Event     1. Hydraulic oil temperature is greater than (42 °C)(108 °F) (Temp Limit) or Hydraulic Oil Temp is unknown or Event is previously active and still in hysteresis(
39 °C (102.2 °F)) and
2. The switch for the hydraulic filter is ACTIVE.    
360     3     Low Engine Oil Pressure     1. Engine Oil Pressure switch is closed for more than 1 second.
2. Engine speed is greater than 400 rpm.    
391     1     Inlet Air Restriction     1. Air filter restriction switch is closed for more than 30 seconds.
2. Engine speed is greater than 400 rpm.    
627 (1)     2     Machine Driven with Parking Brake ON     1. The ground speed is greater than
1 km/h (0.6 mph) in forward or reverse and
2. The Parking Brake switch is closed for 1 second.    
861 (1)     1     Machine Synchronize clock
Manual Alignment     The SYNC Clock requires Manual Adjustment.