BASIC ENGINE ARRANGEMENT 1N5853 - Caterpillar

Illustration 1 g00422979
Note: All bores must be free of paint. Coat all bores for pins with lubricant. This includes pin bores for the boom, the upper frame and the cylinders. (1) 137-2819 Sleeve Bearing Quantity ... 2 Outside diameter ... 106.2 0.013 mm (4.18 0.0005 inch) Inside diameter ... 90.31 0.043 mm (3.56 0.0017 inch) Bore diameter ... 107 0.043 mm (4.21 0.0017 inch) Installation depth ... 9.5 0.5 mm (0.37 0.02 inch) (2) 128-4212 Pin assembly Outside diameter ... 89.85 0.025 mm (3.54 0.0010 inch) Minimum thickness for plating ... 0.005 mm (0.0002 inch) Pin bore diameter ... 90.043 0.043 mm (3.55 0.002 inch)Adjust lateral clearance to a maximum of 1.6 mm (0.06 inch) . (3) 7Y-2497 Shim thickness ... 1.6 mm (0.06 inch) (4) 093-0084 Shim thickness ... 1.0 mm (0.04 inch) (5) 093-0116 Shim thickness ... 2.0 mm (0.08 inch) (6) Torque for bolt ... 325 40 N m (240 30 lb ft) (7) Torque for six bolts ... 240 40 N m (177 30 lb ft)Adjust lateral clearance to a maximum of 1.6 mm (0.06 inch) . (8) 093-0122 Shim thickness ... 2.0 mm (0.08 inch) (9) 7Y-3355 Shim thickness ... 1.6 mm (0.06 inch) (10) 093-0090 Shim thickness ... 1.0 mm (0.04 inch) (11) Lubricate the sealing lip slightly with the lubricant that is being sealed. (12) 7Y-2397 Sleeve bearing Quantity ... 2 Outside diameter ... 116.23 0.013 mm (4.58 0.0005 inch) Inside diameter ... 100.29 0.02 mm (3.95 0.0008 inch) Bore diameter ... 117 0.043 mm (4.61 0.002 inch) Installation depth ... 9.5 0.5 mm (0.37 0.02 inch) (13) 128-5861 Pin Outside diameter ... 99.85 0.04 mm (3.93 0.0016 inch) Minimum thickness for plating ... 0.005 mm (0.0002 inch)