BASIC STARTING ENGINE ARRANGEMENT 4L9846 - Caterpillar

Removal Procedure
Accidental engine starting can cause injury or death to personnel working on the equipment.To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system.Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on.
Disconnect the batteries.
Illustration 1 g01707733
Disconnect cable assemblies (1) from the remote starting switches.
Illustration 2 g01707629
Remove mounting bolts (2) and remove the remote starting switches (3) .
Disconnect the harness assemblies from the control box.
Illustration 3 g01715393
Remove four mounting bolts (5) from control box (4) .
Illustration 4 g01715416
Remove mounting bolt (6) and remove control box (4) .Installation Procedure
Illustration 5 g01715416
Position control box (4) and install mounting bolt (6) .
Illustration 6 g01715393
Install four mounting bolts (5) onto control box (4) .
Connect the harness assemblies onto the control box.
Illustration 7 g01707629
Position the remote starting switches (3) and install mounting bolts (2) .
Illustration 8 g01707733
Connect cable assemblies (1) onto the remote starting switches.
Connect the batteries.