9J3352 BASIC BULLDOZER ARRANGEMENT Caterpillar parts
9A, D9H
Rating:
Alternative (cross code) number:
CA9J3352
9J-3352
9J3352
CA9J3352
9J-3352
9J3352
Weight: 3 pounds 1 kg.
BULLDOZER, TRACK-TYPE TRACTOR,
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1857 Retaining Ring Pliers 1 Start By:
Remove the gear pump. Refer to Disassembly and Assembly, "Gear Pump (Pilot and Auxiliary) - Remove".
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will prevent dirt from entering the internal mechanism.
Illustration 1 g00877056
Note: Mark the position of cover (2) .
Remove bolts (1) and cover (2) .
Illustration 2 g00877057
Remove O-ring seal (3) .Note: Note the orientation of the seals and the plates prior to removal.
Illustration 3 g00877058
Remove plate (4) and the seals.
Illustration 4 g00877059
Remove gears (5) .
Illustration 5 g00877060
Remove plate (6) and the seals.
Illustration 6 g00877061
Note: Mark the position of housing (7) .
Remove housing (7) .
Illustration 7 g00877062
Remove plate (9) and the seals.
Illustration 8 g00877063
Remove gears (10) .
Illustration 9 g00877064
Remove plate (11) and the seals.
Remove O-ring seal (12) .
Illustration 10 g00877065
Use Tooling (A) in order to remove snap ring (13) .
Remove seal (14) .
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1857 Retaining Ring Pliers 1 Start By:
Remove the gear pump. Refer to Disassembly and Assembly, "Gear Pump (Pilot and Auxiliary) - Remove".
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will prevent dirt from entering the internal mechanism.
Illustration 1 g00877056
Note: Mark the position of cover (2) .
Remove bolts (1) and cover (2) .
Illustration 2 g00877057
Remove O-ring seal (3) .Note: Note the orientation of the seals and the plates prior to removal.
Illustration 3 g00877058
Remove plate (4) and the seals.
Illustration 4 g00877059
Remove gears (5) .
Illustration 5 g00877060
Remove plate (6) and the seals.
Illustration 6 g00877061
Note: Mark the position of housing (7) .
Remove housing (7) .
Illustration 7 g00877062
Remove plate (9) and the seals.
Illustration 8 g00877063
Remove gears (10) .
Illustration 9 g00877064
Remove plate (11) and the seals.
Remove O-ring seal (12) .
Illustration 10 g00877065
Use Tooling (A) in order to remove snap ring (13) .
Remove seal (14) .
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts basic Caterpillar catalog:
2P0889
BASIC SEAT GROUP
D5, D6C, D7F, D7G, D8H, D8K, D9G, D9H
D5, D6C, D7F, D7G, D8H, D8K, D9G, D9H
9J7025
BASIC METERING PUMP GROUP
120G, 12G, 130G, 140G
120G, 12G, 130G, 140G
8D7306
BASIC AIR CONTROL VALVE GROUP
120G, 12G, 130G, 140G, 14G, 16G
120G, 12G, 130G, 140G, 14G, 16G