BATTERY 4306001 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7498 Support Stand As 4
1U-7501 Extension Tube 4
B 421-5661 Lifting Eye Assembly 4
C 323-1146 Engine Lifting Device 1
Turn the battery disconnect switch to the OFF position.
Turn the fuel supply valve to the OFF position.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Drain the oil from the engine into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Illustration 1 g06095073
Remove bolts (1), bolts (3), and elbow (2).
Illustration 2 g06095259
Attach Tooling (C) onto the engine. The weight of the C175-16 engine is approximately 12750 kg (28110 lb). The weight of the C175-20 engine is approximately 14000 kg (30865 lb).
Illustration 3 g06095267
Remove bolts (4) and bolts (5).
Illustration 4 g06095290
Raise the engine from engine oil pan (6).
Illustration 5 g06095354
Position the engine on Tooling (A).
Illustration 6 g06095472
Attach Tooling (B) and a suitable lifting device onto engine oil pan (6). The weight of engine oil pan (6) on a C175-16 engine is approximately 591 kg (1303 lb). The weight of engine oil pan (6) on a C175-20 engine is approximately 696 kg (1534 lb). Remove engine oil pan (6).