BATTERY 4M6949 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8T-9011     Component Cleaner     1    
B     4C-9500     Quick Cure Primer     1    
C     1U-8846     Gasket Sealant     1    
Illustration 1 g01153093
Clean the joint face on front housing (4) with Tooling (A) .
Apply Tooling (B) to the joint face. Allow the primer to dry for at least three to five minutes.
Apply Tooling (C) to the joint face. Spread the sealant uniformly. Front housing (4) must be installed within ten minutes of applying the sealant.
Position front housing (4) on the cylinder block.
Install bolts (3) and bolts (5) .
Illustration 2 g01153092
Position front engine support (2) and install bolts (1) .End By:
Install the unit injector hydraulic pump. Refer to Disassembly and Assembly, "Unit Injector Hydraulic Pump - Install".
Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install".