BATTERY-PRIMAR 5143116 - Caterpillar

Parallel Lift Enabled (30b) - Indicates when the Parallel Lift system is enabled.
Remote Throttle Active (31) - This indicator illuminates to show that the remote throttle is active.
Continuous Flow Active (32) - Indicates when continuous flow mode has been activated, the icon will flash green. Once the continuous flow is locked in, the icon will be solid green.Soft Keys
Note: The Seat Direction parameter from the machine ECM conveys if the Operator Seat is Forward, Rear, or Side/Unlatched. This direction is used to determine which Soft Keys are actively available to the operator.
Illustration 5 g06354528
Seat facing front
(33) Menu Soft Key
(34) Continuous Flow Control Soft Key
(35) Power Mode Soft Key (If Equipped)
(36) Automatic Engine Speed Control (AESC) Soft Key
(37a) Return to Dig Set-Point Soft Key
Menu Soft Key (33) - Pressing this soft key opens up the Menu Section.
Continuous Flow Control Soft Key (34) - Pressing this soft key will active continuous flow. The indicator will flash. Select desired flow rate with the thumb wheel. Once the indicator goes solid green, the thumb wheel can be released and the desired flow is locked in place. Pressing the soft key or pressing thumb wheel will kick out the function.
Power Mode Soft Key (If Equipped) (35) - Push the soft key to enable power mode. A pop-up menu will be visible with 2 selections, Power and Standard. Use the scroll arrows to highlight and "OK" to select the desired power mode. If "Power" is selected, the green icon will stay on at the top row. If "Standard" is selected, no icon is shown. Power mode allows full idle. Standard mode limits engine speed to 1900 rpm while using the hoe.
Automatic Engine Speed Control (AESC) (36) - This key sends a request to toggle the Automatic Engine Speed Control feature. When this is active, the machine will kick the engine speed down to low idle when the implement functions are not being used for a period of time.
Return to Dig Set-Point Soft Key (37a) - When the seat is facing forward, select this key to set the Return to Dig position. Press and hold the key for 1.5 seconds and the current bucket position will be set. When racking the tilt back or dumping the tilt, it will return to the set bucket position. When using the rackback or dump detents on the joystick, the bucket will return to this tilt set point.Note: When the seat is facing forward, the return to dig icon will be visible and selectable.Note: When the seat is facing rear, soft keys (33) through (36) will retain original function
Illustration 6 g06354534
Seat facing rear (HEX pattern selected)
(33) Menu Soft Key
(34) Continuous Flow Control Soft Key
(35) Power Mode Soft Key (If Equipped)
(36) Automatic Engine Speed Control (AESC) Soft Key
(37b) Joystick Pattern Soft Key (HEX pattern selected)
Joystick Pattern Soft Key (HEX pattern selected) (37b) - The machine is equipped with a joystick pattern soft key. The machine control pattern can be varied by selecting the soft key. The HEX icon shows the functionality of