BATTERY 9G9033 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-2086 Installer 1
9S-8874 Locator 1
B 5P-0960 Grease Cartridge 1 Start By:
Remove the oscillating axle.
Illustration 1 g03718935
Place the oscillating axle on suitable blocking, as shown.
Remove yoke (1) from the differential pinion shaft.
Illustration 2 g03718954
Fasten a suitable lifting device to front trunnion support (2). Remove front trunnion support (2) from the oscillating axle. The weight of front trunnion support (2) is approximately 43 kg (95 lb).
Illustration 3 g00292632
Remove lip seal (3) from the front trunnion support. Repeat this step for the lip seal on the opposite side of the front trunnion support.
Remove retaining ring (4) that holds sleeve bearing (5) in the front trunnion support.
Use a suitable press and Tooling (A) to remove sleeve bearing (5) from the front trunnion support. Installation Procedure
Illustration 4 g00292633
(3) Lip Seal. (4) Retaining Ring. (5) Sleeve Bearing.
Illustration 5 g03719356
Use a suitable press and Tooling (A) to install sleeve bearing (5) in front trunnion support (2). Make sure that the sleeve bearing contacts the counterbore in front trunnion support (2).
Illustration 6 g03719387
Use a suitable press and Tooling (A) to install lip seal (3) in both sides of the front trunnion support. Make sure that lip seal (3) contact the counterbores in the front trunnion support. Note: Each lip seal must be installed so that the sealing lip is facing toward the outside of the front trunnion support, as shown.
Install retaining ring (4) that holds sleeve bearing (5) in front trunnion support (2).
Apply Tooling (B) on the sealing lips of the lip seals.
Illustration 7 g03719003
Fasten a suitable lifting device to front trunnion support (2). Install front trunnion support (2) on the oscillating axle. The weight of front trunnion support (2) is approximately 43 kg (95 lb).
Illustration 8 g03719010
Install yoke (1) on the differential pinion shaft. End By:
Install the oscillating axle.