BEAM ASSEM. 8J6610 - Caterpillar

8J6610 BEAM ASSEM. Caterpillar parts D9H

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8J6610
8J-6610
8J6610

Weight: 3290 pounds 1492 kg.

Buy BEAM ASSEM. 8J6610 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 8J6610:

TRACK-TYPE TRACTOR D9H Caterpillar

Number on catalog scheme: 1

Caterpillar 8J6610 Parts scheme BEAM ASSEM.

For full view, you need register

Information:

Which Generate This Code:This diagnostic code is recorded when the implement electronic control (ECM) determines that the solenoid valve is out of calibration.The possible causes for this diagnostic code are listed:
New software has been flashed.
The calibration of the valve has failed.Note: Ensure that the diagnostic code is active.Test Step 1. CHECK CALIBRATION.
Calibrate the main control valve. See Testing and Adjusting, "Main Control Valve (Electronic Technician) - Calibrate" or Testing and Adjusting, "Main Control Valve (Operator Monitor) - Calibrate".
Recheck the diagnostic code.
Ensure that the diagnostic code is active.
Observe the ON/OFF status of the diagnostic code indicator as the auxiliary function is fully actuated.Expected Result:The diagnostic code indicator is inactive.Results:
YES - The diagnostic code indicator is inactive.Repair: The diagnostic code is not active now. Calibration corrected the diagnostic code. Clear the diagnostic code. Stop.
NO - The diagnostic code indicator is active.Repair: It is unlikely that the ECM has failed. Perform calibration for the Main Control Valve again. Also, ensure that the diagnostic code indicator is active for this diagnostic code. If the cause is not found, replace the solenoid and perform the calibration again. If this does not eliminate the diagnostic code, replace the ECM. See Testing and Adjusting, "Electronic Control Module (ECM) - Replace". Stop.