BEARING ROD 0340298 - Caterpillar

Illustration 2 g02436556Model number (A)____________________Product Identification Number (B)____________________Service Information Plate (C)____________________Month and Year of Manufacture Plate (If Required) (D)____________________CE Plate (If Required) (E)____________________Country of Origin Info Plate (If Required) (F)____________________Local regulation may require documentation of the month and/or year of manufacture in the Operation and Maintenance Manual. Enter on line (D) above if required.
Illustration 3 g03477118Serial number plate for the transmission is on the back side of the transmission.Transmission serial number____________________Transmission arrangement number____________________Torque converter serial number____________________
Illustration 4 g03477121Serial number plate for the engine can be found on top of the engine.Engine model number____________________Engine serial number____________________Engine arrangement number____________________Certification
ROPS/FOPS Structure
This message is positioned on the ROPS.
Illustration 5 g03694619
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification film. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification film.Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.European Union
Illustration 6 g02162815This plate is positioned on the bottom left side of plate (1) for the PIN.Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.For machines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power Primary Engine (kW)____________________
Engine Power for Additional Engine (If Equipped) ____________________
Typical Machine Operating Weight for European Market (kg)____________________
Year of Construction____________________
Machine Type ____________________For the name and address of the manufacturer, and the country of origin of the machine, refer to the PIN plate.Product Link
If equipped, this message is used to verify the certification of