BEARING 0635787 - Caterpillar

Illustration 1 g00714178
Adaptable To: The new 189-0602 Hinge is effective with D350E Series II (PIN: 2XW327-UP), D400E Series II (PIN: 8PS683-UP) and D400E Series II Ejector (PIN: APF276-UP). The new hinge is adaptable to earlier machines.The 147-1915 Cover and the 147-1917 Plate will need to be modified in order to install the new hinge on earlier machines.
Illustration 2 g00714179
Modification of 147-1917 Plate
Illustration 3 g00714180
Modification of 147-1915 Cover
Illustration 4 g00717058
Detail of Slot (C)
Table 1
Dimensions For Modifications To 147-1917 Plate and 147-1915 Cover    
Reference            
A     Dimension    
34 0.3 mm (1.34 0.01 inch)    
B     Hole Ø    
6.5 mm (0.26 inch)    
D     Hole Ø    
6.5 mm (0.26 inch)    
E     Dimension    
4 mm (0.16 inch)    
F     Dimension    
103.5 1 mm (4.07 0.04 inch)    
G     Dimension    
200 2 mm (7.87 0.08 inch)    
H     Dimension    
16 2 mm (0.63 0.08 inch)    
I     Hole Ø    
8 mm (0.32 inch)    The modification may be carried out by using the following procedure.
Remove the 147-1917 Plate, 147-1915 Cover and the 147-1919 Hinge .
Modify the 147-1917 Plate to the dimensions that are given in Illustration 2 and in Table 1.
Modify the 147-1915 Cover to the dimensions that are given in Illustration 3 and in Table 1. Refer to Illustration 1 for details of the modification to hole (C) on both the 147-1917 Plate and the 147-1915 Cover .
Insert the 6U-5960 Grommets into holes (I) on the 147-1915 Cover .
Assemble the new hinge to the cover and the plate. Install the assembly onto the machine.