BEARING, NEE 0774907 - Caterpillar

Illustration 1 g00290413
The crankcase drain plug is on the left side of the oil pan.
Remove the crankcase drain plug and drain the oil into a suitable container. Clean the crankcase drain plug and replace the crankcase drain plug.
Illustration 2 g00287238
Remove the engine access panel on the left side of the machine.
Illustration 3 g00290708
Remove the filter element with a strap type wrench. Refer to Operation and Maintenance Manual, "Oil Filter - Inspect".
Clean the filter mounting base with a clean cloth. Make sure that the old filter gasket has been removed.
Apply a thin film of clean engine oil to the sealing surface of the new filter element.
Install the new filter element by hand. When the gasket contacts the filter base, tighten the filter for an additional 3/4 turn.
Illustration 4 g00287385
Illustration 5 g00287410
Pull the hood release lever (1) in order to open the engine access door (2) on the top of the machine.
Illustration 6 g00287411
Remove the oil filler cap (4). Fill the crankcase with new oil. Refer to Operation and Maintenance Manual, "Lubricant Viscosities" and Operation and Maintenance Manual, "Refill Capacities". Clean the oil filler cap and install the oil filler cap.
Start the engine and allow the oil to warm. Check for leaks.
Stop the engine and allow the oil to drain back into the oil pan. Maintain the oil level in the crosshatched region of the engine oil dipstick (3). Add oil, if necessary.
Replace the engine access panel and close the engine access door.