BEARING 0929539 - Caterpillar

Turn the disconnect switch OFF or disconnect the battery when changing fuel filters.Do not fill fuel filters with fuel before installing them. Contaminated fuel will cause accelerated wear to fuel system parts.
Open the engine access doors.
Illustration 1 g03244779
Remove the fuel filter.
Inspect the fuel filter for debris by cutting the fuel filters open. Note: The fuel filters are cartridge type filters. The filters cannot be reused.Note: Dispose of used filters and used fluids according to local regulations.
Clean the filter mounting base. Make sure that all of the old seal is removed.
Illustration 2 g00101634
Lubricate the seal of the new filter with clean diesel fuel.
Install the new filter by hand. Additionally tighten the filter by 3/4 of a turn, after the gasket contacts the filter base. Every new filter has four rotation index marks. Each mark indicates 1/4 turn. Use these rotation index marks as a guide for proper tightening.
Prime the fuel system. Refer to Operation and Maintenance, "Fuel System - Prime".
Close the engine access doors.