BEARING, BALL 0960464 - Caterpillar

Valve Module Messages
Table 4
Diagnostic Codes For The AccuGrade - Grade Control System (1)    
Diagnostic Code    Description    
VM 1     Memory Eror. Recalibrate    
VM 5     Internal Failure    
VM 7     Communication Error. Cycle Power    
VM 10     Check Left Valve Hardware    
VM 11     Check Right Valve Hardware    
VM 12     Multiple VM4xx    
VM 13     Communication Error. Cycle Power    
VM 14     Internal Failure    
VM 15     Too Many Devices In The Network    
VM 16     Check Parameter    
VM 17     Valve Drive Failure    
VM 18     Valve Drive Failure    
VM 19     Valve Drive Failure    
VM 20     Valve Drive Failure    
VM 21     FI Failure    
VM 22     Load Sense Shorted    
VM 23     Ctrl. Sig Shorted    
VM 24     12C Interface Failure    
VM 25     Valve Control Signal Failure    Implement and Valve Control ECM MID 114 Diagnostic Codes
Table 5
Diagnostic Codes For The AccuGrade Grade Control System (1)    
Implement ECM (MID 114)    
CID - FMI     Description    
168 - 03     Electrical System Voltage Above Normal    
168 - 04     Electrical System Voltage Below Normal    
248 - 02     Invalid Cat Data Link Data    
248 - 09     Cat Data Link Not Communicating    
248 - 12     Cat Data Link Malfunction    
262 - 03     5 Volt Sensor Power Supply Voltage Above Normal    
262 - 04     5 Volt Sensor Power Supply Voltage Below Normal    
358 - 3     Implement Pilot Supply Sol Votage Above Normal    
358 - 5     Implement Pilot Supply Sol Open Circuit    
358 - 6     Implement Pilot Supply Sol Current Above Normal    
497 - 3     Tilt Right Solenoid Shorted High    
497 - 5     Tilt Right Solenoid Open Circuit    
497 - 6     Tilt Right Solenoid Current Above Normal    
498 - 3     Tilt Left Solenoid Shorted High    
498 - 5     Tilt Left Solenoid Open Circuit    
498 - 6     Tilt Left Solenoid Current Above Normal    
874 - 3     Mode Select Switch Open/Shorted High    
874 - 4     Mode Select Switch Short to Ground    
875 - 3     Manual Select Switch Open/Shorted High    
875 - 4     Manual Select Switch Short to Ground    
1197 - 3     Blade Lower Solenoid Shorted High    
1197 - 5     Blade Lower Solenoid Open Circuit    
1197 - 6     Blade Lower Solenoid Current Above Normal    
1198 - 3     Blade Raise Solenoid Shorted High    
1198 - 5     Blade Raise Solenoid Open Circuit    
1198 - 6     Blade Raise Solenoid Current Above Normal    
2114 - 3     Blade Control Handle Trigger Switch Open/Shorted High    
2114 - 4     Blade Control Handle Trigger Switch Short to Ground