BEARING 1051642 - Caterpillar

425-6889 Cable As
Illustration 1 g03397004
425-6889 Cable As The 425-6889 Cable As is used to connect the nine pin service port on the Network Manager wiring harness to a laptop computer. The 425-6889 Cable As allows the user to flash software onto the Network Manager through WinFlash. The 425-6889 Cable As also allows the user to access the "Service Dashboard".Service Dashboard
The "Service Dashboard" is accessed by attaching the 425-6889 Cable As to the PL E601 harness, and a laptop. Once a connection is made, the user can use the following Steps to access the "Service Dashboard".
Open WinFlash but do not flash any software. Refer to System Operation Troubleshooting Testing and Adjusting, UENR3697, "Electronic Control Module (ECM) - Flash Program" for more information.
Once WinFlash is connected open any web browser.
Illustration 2 g03703627
Product Link web Landing Page
Type in the following URL http://165.26.78.1. The "Web Configuration" page or home screen will open. Refer to Illustration 2.Service Dashboard
Illustration 3 g03703633
Service Dashboard pageThe "Service Dashboard" is an embedded web page with information about the Product Link device. The "Service Dashboard" includes the ability to download reports for troubleshooting, and the ability to run service tests.Connected Devices
Illustration 4 g03706548
The "Connected Devices" section includes information about what devices are connected and recognized by the PLE601 Network Manager on each of the four ethernet ports.Radio Interface
Illustration 5 g03706538
The "Radio Information" drop-down in the "Service Dashboard" provides important information about the radio including what the signal strength is and which network the radio is connected to.Product Link Interface
Illustration 6 g03703641
The "Product Link Interface" page supplies basic system information about PL E601 Network Manager device installed.Communication Check
Illustration 7 g03703642
Illustration 8 g03703643
The "Communication Check" is an end to end test that verifies that Product Link Web is receiving the information being transmitted by the PL640 radio. Once the "Communication Check" link is selected, the test automatically begins. The test will check end to end communication for up to 3 minutes. Once the test is complete, the user will receive a message that the test passed or failed. Refer to Illustration 7 and Illustration 8.Connection and File Transfer Log
Illustration 9 g03703655
The "Connection and File Transfer Log" records every time that the Product Link device attempts to create a connection, and every file that is transferred to the "User Interface". The log displays if the connection attempt was successful, or failed. It also displays whether each file being transferred was successful or failed.Settings