1056196 BEARING-SLEEVE Caterpillar parts
350, 350 L, 5080, S25, S365B, VHS-60/3
Rating:
Alternative (cross code) number:
CA1056196
105-6196
1056196
CA1056196
105-6196
1056196
Weight: 8 pounds 3 kg.
EXCAVATOR, SHEAR-DEMOLITION/SCRAP,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$112.82
07 Dec 2019
5.0[2.25] Pounds
-: -
Toro Shield Asm Part # 105-6196
Toro Shield Asm Part # 105-6196
Toro Shield Asm Part # 105-6196
Number on catalog scheme:
2
For full view, you need register
Compatible equipment models: 1056196:
Information:
Illustration 1 g02916756
Table 1
Specification for 304-4910 Stick Cylinder Gp
Item Qty Part Specification Description
1 Bushing is one of the following part numbers:
1 166-1678 Bushing Bore diameter before assembly is 55.13 0.02 mm (2.170 0.001 inch).
Installation depth is
4.85 0.50 mm (0.191 0.020 inch).
1 218-5193 Bushing Bore diameter before assembly is
55.200 0.025 mm (2.1732 0.0010 inch).
Installation depth is
4.85 0.50 mm (0.191 0.020 inch).
2 1 125-1830 Insert Locknut Before assembly, lubricate face and threads all around with 309-6932 Hydraulic Oil .
Torque to
1800 90 N m (1328 66 lb ft).
3 1 099-6976 Ring Lubricate inside diameter and outside diameter with clean grease.
4 1 099-6973 Seal As Lubricate inside diameter and outside diameter with clean grease.
5 1 105-2630 Ring Lubricate inside diameter and outside diameter with clean grease.
A 1 235-8288 Cylinder As Bore diameter is
90.080 0.030 mm (3.5465 0.0012 inch).
B 1 235-7914 Rod As Diameter is
59.930 0.030 mm (2.3594 0.0012 inch).
6 1 114-0751 Bushing Out side diameter before assembly is
65.120 0.025 mm (2.5638 0.0010 inch).
Thickness is
2.480 0.020 mm (0.0976 0.0008 inch).
7 1 099-6982 Ring Before assembly, apply red Loctite 596 to the hole of the ring.
8 1 085-7990 Head Bore over two lands (C) is
60.530 0.030 mm (2.3831 0.0012 inch).
Before drilling operation, tighten the head to
550 55 N m (406 41 lb ft).
9 Bushing is one of the following part numbers:
1 166-1678 Bushing Bore diameter before assembly is
55.13 0.02 mm (2.170 0.001 inch).
Installation depth is
5.00 0.50 mm (0.197 0.020 inch).
1 218-5193 Bushing Bore diameter before assembly is
55.200 0.025 mm (2.1732 0.0010 inch).
Installation depth is
5.00 0.50 mm (0.197 0.020 inch).
10 1 194-8248 Stop Stop must have
0.50 0.26 mm (0.020 0.010 inch) free lineal movement after assembly.
11 2 095-0924 Retaining Ring After assembly maximum out side diameter is
42 mm (1.7 inch).
12 1 105-7265 Seal Ring Slit of ring must turn in direction of piston.
13 1 133-6984 Buffer Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
14 1 093-1475 U-Cup Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
15 1 165-9281 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
Caterpillar parts catalog:
Parts bearing Caterpillar catalog:
375, 375 L, 5080
350, 350 L, 365C, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L, 390F L, 5080, S305, S465, VHS-50
365C, 375, 375 L, 385B, 385C, 385C L, 5080
365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C L, 5080
320B, 320C, 321C, 322B LN, 322C, 322C FM, 325, 325B, 325B L, 325C, 325D, 330B L, 330C L, 345B II, 345B L, 365B, 375, 5080, TK1051
325C, 330, 330B, 330B L, 345B II, 345B L, 350 L, 365B, 5080, S25, W330B
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D FM, 324D FM LL, 325 LN, 325B L, 330, 330 FM L, 330 L, 330B, 330B L, 345B II, 345B L, 350, 350 L, 365B, 365B II, 365B L, M325B, W330B
322B, 322B L, 322B LN, 322C, 322C FM, 324D FM, 325, 325B, 325B L, 325C, 325C L, 330, 330 FM L, 330 L, 330B, 330B L, 330C L, 345B, 345B II, 345B II MH, 345B L, 350 L, 365B, 365B II, 375, 385B, M325B, S...
345C, 350
350, 584
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, S365B, VHS-60/3
350, 350 L
1179430
BEARING
350 L, 375, 5080
350 L, 375, 5080
1671121
BEARING
330B L, 345B L, 5080
330B L, 345B L, 5080
365C, 375, 375 L, 385B, 385C, 385C L, 5080
365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L, 390F L, 5080
345C, 350 L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L, 390F L, 5080, P16, S25
345B, 345B II, 345B II MH, 345B L, 345C, 365B, 365B II, 365B L, 385B, 5080, W345B II
350, 350 L, 365C, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L, 390F L, 5080, S305, S465, VHS-50
375, 375 L, 5080
365C, 375, 375 L, 385B, 385C, 385C L, 5080, P115, VPC-30
365B, 375, 375 L, 5080
365B, 365B II, 365B L, 365C, 365C L, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L, 390F L, 5080, P115, VPC-30
330B L, 330C FM, 330D FM, 345B, 345B II, 345B II MH, 345B L, 350 L, 365B, 365B II, 365C, 375, 385B, 385C L, 5080, S305, S365B, S365C, VHS-50, VHS-60/3, W345B II