BEARING-SPHERICAL 1069343 - Caterpillar

Illustration 1 g03692650
Table 1
Specification for 393-2760 Auger Conveyor and Mounting Gp and 446-1209 Auger Conveyor and Mounting Gp    
Item     Qty     Part     Specification Description    
1     8     8T-4193 Bolt     Tighten the bolts enough so that free play has been removed in the auger frame and secure with jam nuts.    
2     -     -     Apply Loctite C5A Copper Anti-Seize to all contact surfaces on tensioner plates, auger frame plate slots, washer contact areas, and tractor main frame slots.    
3     1     421-3386 Plate As     Before assembly, apply Loctite C5A Copper Anti-Seize to the contact surfaces.    
4     1     393-2293 Cover     Before assembly, apply Permetex Form-A-Gasket number 2, to seal cover to auger support.    
Illustration 2 g03692651
Table 2
Item     Qty     Part     Specification Description    
5     1     430-5201 Plate     Before assembly, apply Loctite C5A Copper Anti-Seize to the contact surfaces.    
6     1     393-2754 Plate As     Before assembly, apply Loctite C5A Copper Anti-Seize to the contact surfaces.    
7     2     442-7825 Plate     Before assembly, apply Loctite C5A Copper Anti-Seize to the contact surfaces.    
8     12     7X-2475 Bolt     Torque to
200 10 N m (148 7 lb ft).    
Illustration 3 g03692652
Right side view
Table 3
Item     Qty     Part     Specification Description    
B     -     -     Sprockets to be aligned within
60 2 mm (2.4 0.1 inch) on both sides to the plates.    
9     4     4B-1771 Setscrew     Before assembly, apply blue Loctite 242 to the threads.    
10     4     2H-3906 Socket Setscrew     Before assembly, apply blue Loctite 242 to the threads.    
11     2     382-5519 Auger Bearing     Use the following procedure to assemble the auger bearings:
1. Tighten the split cap close to the shaft.
2. Fully push the split cap on the housing of the auger bearing.
3. Tighten the bolts of the split cap.