1152632 BEARING-SLEEVE Caterpillar parts
325, 325B L
Rating:
Alternative (cross code) number:
CA1152632
115-2632
1152632
CA1152632
115-2632
1152632
Weight: 3 pounds 1 kg.
EXCAVATOR,
For full view, you need register
Information:
1. Use tool (A) to remove fuel filter (1) from the fuel filter base. 2. Disconnect tube assembly (2) from fuel filter base (4).3. Remove bolts (3), the gasket and the fuel filter base from the fuel injection pump. 4. If necessary, remove stud (5) from the fuel filter base.Install Fuel Filter And Base
1. If the stud was removed from the fuel filter base, put 9S3263 Thread Lock only on the threaded end of stud (1) that is to be installed into the fuel filter base. The thread lock must cover the threads approximately 7.6 1.5 mm (.30 .06 in.) from the taperlock end of the stud.
Do not damage sealing surface (2) of the stud.
2. Install stud (1) in the fuel filter base, and tighten it to a torque of 68 14 N m (50 10 lb.ft.).3. After stud (1) has been tightened to the specific torque in Step 1, the distance from the sealing surface of the base (3) to the end of stud (1) must be 24.6 1.3 mm (.97 .05 in.). 4. Inspect the fuel filter base gasket, and make a replacement if necessary.5. Put fuel filter base (4) in position on the fuel injection pump, and install the bolts that hold it. 6. Connect tube assembly (5) to the fuel filter base.7. Put clean diesel fuel on the filter gasket.8. Install fuel filter (6) according to the directions on the filter. See the Maintenance Guide for the correct service intervals.
1. If the stud was removed from the fuel filter base, put 9S3263 Thread Lock only on the threaded end of stud (1) that is to be installed into the fuel filter base. The thread lock must cover the threads approximately 7.6 1.5 mm (.30 .06 in.) from the taperlock end of the stud.
Do not damage sealing surface (2) of the stud.
2. Install stud (1) in the fuel filter base, and tighten it to a torque of 68 14 N m (50 10 lb.ft.).3. After stud (1) has been tightened to the specific torque in Step 1, the distance from the sealing surface of the base (3) to the end of stud (1) must be 24.6 1.3 mm (.97 .05 in.). 4. Inspect the fuel filter base gasket, and make a replacement if necessary.5. Put fuel filter base (4) in position on the fuel injection pump, and install the bolts that hold it. 6. Connect tube assembly (5) to the fuel filter base.7. Put clean diesel fuel on the filter gasket.8. Install fuel filter (6) according to the directions on the filter. See the Maintenance Guide for the correct service intervals.
Caterpillar parts catalog:
Parts bearing Caterpillar catalog:
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 214B, 30/30, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 3...
120H, 120H ES, 120H NA, 135H, 135H NA, 3114, 3116, 3126B, 3126E, 320 L, 320B, 322B L, 322B LN, 325 LN, 325B L, 446B, 446D, 45, 561M, 613C II, 924F, 928F, 928G, 938F, 950F, 950F II, 953C, 960F, 963B, A...
120H, 120H ES, 120H NA, 135H, 135H NA, 205B, 213B, 3116, 320 L, 320B, 322B L, 322B LN, 325, 325B, 325B L, 45, 561M, 613C II, 918F, 928F, 928G, 938F, 950F, 950F II, 950G, 953C, 960F, 963B, AP-1000, AP-...
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM...
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 160K, 211B, 214B, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320 L, 320B, 322B L, 322B LN, 322C, 322C FM, 324D, 324...
307B, 311, 311B, 312, 312B, 312B L, 313B, 320 L, 320B, 320C, 320N, 322B L, 322C, 322C FM, 325, 325 L, 325B L, 325C, 330B L, 350, 350 L, 375, 375 L
315, 315B, 315B L, 317, 317B LN, 318B, 320B, 320B L, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B L, 330B L, 345B L, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, ...
1390, 2590, 320 L, 320B, 325B L, 325C, 325C FM, 325D FM, 325D FM LL, 330, 330 FM L, 330 L, 330B, 330B L, 330C FM, 330D FM, 330D L, 336D L, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345D, 345D L...
325B L, 330B L, CTV30, GSH15, GSH15-60, GSH22B, GSH9, GSH9B, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH
215B, 225, 229, 320B, 321B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 539, E300B, M325B
215B, 225, 229, 320B, 321B, 322B L, 322B LN, 325, 325 LN, 325B, 325B L, 539, E300B, M325B
215B, 225, 231D, 320 L, 320B, 321B, 322B L, 322B LN, 325, 325 L, 325 LN, 325B, 325B L, 539, E300B, M325B
350, 350 L
350, 350 L
6E3531
BEARING
350, 350 L, 375, 375 L
350, 350 L, 375, 375 L
330B L, 330C, 330C L, W330B
325B L, 330, 330B, 330B L
5I4477
BEARING AS
330, 330 FM L, 330 L, 330B L, 345B, 345B L, W330B
330, 330 FM L, 330 L, 330B L, 345B, 345B L, W330B
330, 330 FM L, 330 L, 330B, 330B L, 345B, 345B L, W330B
330, 330 FM L, 330 L, 330B, 330B L, 345B, 345B L, W330B
330, 330 FM L, 330 L, 330B, 330B L, W330B