BEARING 1252562 - Caterpillar

Illustration 1 g02562997
Table 1
Specification for the 237-1962 Electric Starting Motor Gp
Item Qty Part Specification Description
B - - Clearance between the pinion and the housing is 9.1 mm (0.36 inch).
1 2 6V-8188 Nut Ground terminal. Torque to 30.5 3.5 N m (270.0 31.0 lb in).
2 2 4B-2049 Nut Torque to 2.25 0.25 N m (19.91 2.21 lb in).
3 1 6V-8188 Nut Motor terminal. Torque to 30.5 3.5 N m (270.0 31.0 lb in).
4 1 6V-8188 Nut Battery terminal. A maximum of three cable terminals or wire terminals may be used with the battery terminal nut. A maximum of two of the cable terminals may be equal to or greater than 0 AWG.
Torque to 30.5 3.5 N m (270.0 31.0 lb in).
5 - - Motor frame terminal. Torque to 30.5 3.5 N m (270.0 31.0 lb in).
- - - Pull-in current at 20 V and 25° C (77° F) is 49.3 3.3 Amp.
Hold-in current at 20 V and 25° C (77° F) is 6.8 Amp max.
- - - When the electric starting motor is viewed from the pinion end, the motor rotates in the clockwise direction.
- - - No load conditions at 25 °C (77 °F):
Speed is 6950 1650 rpm.
Current draw is 115 25 Amp.
Voltage is 23 VDC.