1450163 BEARING MAIN Caterpillar parts
Rating:
Alternative (cross code) number:
CA1450163
145-0163
1450163
CA1450163
145-0163
1450163
Weight: 0.50 pounds 0 kg.
Related part:
1450163
BEARING-MAIN-YM
4196336
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Compatible With B5 POLO Windscreen Washer Pump Twin Outlet For Part Number 1450175 1450163 A2108691021 A2048660221 Aftermarket Replacement
spnqkxf Compatible with B5 Polo models for integration || Fits multiple part numbers including 1450175 and 1450163 || Direct replacement for A2108691021 and A2048660221 || Twin outlet design ensures efficient fluid distribution || Easy installation with standard mounting points
spnqkxf Compatible with B5 Polo models for integration || Fits multiple part numbers including 1450175 and 1450163 || Direct replacement for A2108691021 and A2048660221 || Twin outlet design ensures efficient fluid distribution || Easy installation with standard mounting points
Washer Pump Water Spray Motor Compatible With Opel & Compatible With fiat - OEM 1450175, 1450162, 1450163
LIHUANGUS High compatibility with and models, ensuring a fit for OEM numbers 1450175, 1450162, and 1450163. || Powerful 12-volt motor delivers an impressive flow rate of 2000ml/min for efficient windshield cleaning. || construction with ABS plastic shell and rubber sealing ring, designed to withstand harsh weather conditions. || Features a double outlet design for effective front and rear windshield spraying, enhancing visibility during rain. || Easy installation process with a compact design, making it a convenient replacement for your vehicle's washer system. || Dear customer, before placing an order, please carefully check whether the product pictures match the actual product, or confirm if the part number matches. If there is any uncertainty, we are always willing to provide verification assistance to ensure that you purchase the desired product. Thank you for your trust and support!
LIHUANGUS High compatibility with and models, ensuring a fit for OEM numbers 1450175, 1450162, and 1450163. || Powerful 12-volt motor delivers an impressive flow rate of 2000ml/min for efficient windshield cleaning. || construction with ABS plastic shell and rubber sealing ring, designed to withstand harsh weather conditions. || Features a double outlet design for effective front and rear windshield spraying, enhancing visibility during rain. || Easy installation process with a compact design, making it a convenient replacement for your vehicle's washer system. || Dear customer, before placing an order, please carefully check whether the product pictures match the actual product, or confirm if the part number matches. If there is any uncertainty, we are always willing to provide verification assistance to ensure that you purchase the desired product. Thank you for your trust and support!
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03797448
Illustration 2 g03797450
Loosen hose clamp (1) and hose clamp (7) for hose assembly (5). Remove clip (6).
Disconnect hose assembly (5) from breather heater (8) and crankcase breather canister (9).
Loosen hose clamp (2) and loosen hose clamp (4) for hose assembly (3).
Disconnected hose assembly (3) from crankcase breather canister (9) and engine body.
Open hose clip (10) and move hose clip down on hose assembly (11). Open hose clip (12) and move hose clip up onto hose assembly (11).
Remove hose assembly (11) from crankcase breather canister (9) and remove hose assembly from cylinder block.
Remove bolts (14) from crankcase breather canister (9).
Remove crankcase breather canister (9) from bracket (13).
If necessary, disassemble the crankcase breather canister. Refer to Operation and Maintenance Manual, "Crankcase Breather (Canister) - Replace" for the correct procedure.
Illustration 3 g03798106
Follow Step 10.a through Step 10.c in order to disassemble valve mechanism cover (18).
Remove valve mechanism cover (18). Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Remove screws (17) and carefully remove baffle plate. (16).
If necessary, remove adaptor (15) from valve mechanism cover (18). Breather Heater Remove
If necessary, remove the breather heater.
Illustration 4 g03819347
Remove electrical connection (not shown). Loosen hose clamp (1) on hose (5). Note: Hose (5) can be disconnected from connector (6).
Loosen hose clamp (3) and remove heater assembly from air connection (4). Remove hose clamp (3) from air connector (4). Remove hose clamp (1) from hose (5). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 247-5377 Torque Wrench 1
B 185-3996 Thread Lock Compound Loctite 243 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Make sure that the components of the breather assembly are installed correctly. Engine damage may occur if the breather assembly is not working properly.
Illustration 5 g03798106
Clean all parts and inspect all parts. Replace any parts that are worn or damaged. Ensure that the cavity for the breather in valve mechanism cover (18) is clean and free from restriction.
If necessary, follow Step 2.a through Step 2.d in order to assemble valve mechanism cover (18).
Position baffle plate (16) into valve mechanism cover (18).
Apply Tooling (B) to screws (17). Install screws (17) to baffle plate (16). Tighten the screws to a torque of 1.5 N m (13 lb in).
If necessary, install adaptor (15) to valve mechanism cover (18). Tighten the adaptor to a torque of 20 N m (177 lb in).
Install valve mechanism cover (18). Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Illustration 6 g03797450
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03797448
Illustration 2 g03797450
Loosen hose clamp (1) and hose clamp (7) for hose assembly (5). Remove clip (6).
Disconnect hose assembly (5) from breather heater (8) and crankcase breather canister (9).
Loosen hose clamp (2) and loosen hose clamp (4) for hose assembly (3).
Disconnected hose assembly (3) from crankcase breather canister (9) and engine body.
Open hose clip (10) and move hose clip down on hose assembly (11). Open hose clip (12) and move hose clip up onto hose assembly (11).
Remove hose assembly (11) from crankcase breather canister (9) and remove hose assembly from cylinder block.
Remove bolts (14) from crankcase breather canister (9).
Remove crankcase breather canister (9) from bracket (13).
If necessary, disassemble the crankcase breather canister. Refer to Operation and Maintenance Manual, "Crankcase Breather (Canister) - Replace" for the correct procedure.
Illustration 3 g03798106
Follow Step 10.a through Step 10.c in order to disassemble valve mechanism cover (18).
Remove valve mechanism cover (18). Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Remove screws (17) and carefully remove baffle plate. (16).
If necessary, remove adaptor (15) from valve mechanism cover (18). Breather Heater Remove
If necessary, remove the breather heater.
Illustration 4 g03819347
Remove electrical connection (not shown). Loosen hose clamp (1) on hose (5). Note: Hose (5) can be disconnected from connector (6).
Loosen hose clamp (3) and remove heater assembly from air connection (4). Remove hose clamp (3) from air connector (4). Remove hose clamp (1) from hose (5). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 247-5377 Torque Wrench 1
B 185-3996 Thread Lock Compound Loctite 243 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Make sure that the components of the breather assembly are installed correctly. Engine damage may occur if the breather assembly is not working properly.
Illustration 5 g03798106
Clean all parts and inspect all parts. Replace any parts that are worn or damaged. Ensure that the cavity for the breather in valve mechanism cover (18) is clean and free from restriction.
If necessary, follow Step 2.a through Step 2.d in order to assemble valve mechanism cover (18).
Position baffle plate (16) into valve mechanism cover (18).
Apply Tooling (B) to screws (17). Install screws (17) to baffle plate (16). Tighten the screws to a torque of 1.5 N m (13 lb in).
If necessary, install adaptor (15) to valve mechanism cover (18). Tighten the adaptor to a torque of 20 N m (177 lb in).
Install valve mechanism cover (18). Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure.
Illustration 6 g03797450
Parts bearing Caterpillar catalog:
1449510
BEARING-CSHFT
Caterpillar
Caterpillar
1449505
BEARING-CSHFT
Caterpillar
Caterpillar
1449504
BEARING-CSHFT
Caterpillar
Caterpillar
1448895
BEARING KIT
Caterpillar
Caterpillar
1448894
BEARING KIT
Caterpillar
Caterpillar
1448893
BEARING KIT
Caterpillar
Caterpillar
1454853
BEARING
Caterpillar
Caterpillar
1454040
BEARING
Caterpillar
Caterpillar
1453728
BEARING
Caterpillar
Caterpillar
1450716
BEARING
Caterpillar
Caterpillar
1450635
BEARING
Caterpillar
Caterpillar
Caterpillar