1484744 BEARING AS Caterpillar parts
315C, 315D L, 318B, 318D L
Rating:
Alternative (cross code) number:
CA1484744
148-4744
1484744
CA1484744
148-4744
1484744
Weight: 14 pounds 6 kg.
EXCAVATOR,
Number on catalog scheme:
15
For full view, you need register
Information:
Note: Refer to Illustration 9 for the control input.
Press and hold the control input for activation of the work tool to the FULL ON position during calibration.Note: Use the arrows to scroll down to view the machine "Engine Speed", "Hydraulic Oil Temperature", "Pump #1 Outlet Pressure", and "Pump #2 Outlet Pressure".
Set the main pump pressure using load valve (D2) on the flow meter to 16000 500 kPa (2321 73 psi).
Use the arrows to adjust the flow until the flow reading for the flow limit valve is at 200 2 L/min (52.8 0.5 US gpm). Press the device for activation 3 times and release the device for activation 3 times for each adjustment.
Repeat Steps 7 and 8 until the flow meter reads 200 2 L/min (52.8 0.5 gpm) and the pressure gauge reads 16000 500 kPa (2321 73 psi).
Press the OK key.
Illustration 14 g03591697
Note: Refer to Illustration 9 for the control input.
Press and hold the control input for activation of the work tool to the FULL ON position during calibration.Note: Use the arrows to scroll down to view the machine "Engine Speed", "Hydraulic Oil Temperature", "Pump #1 Outlet Pressure", and "Pump #2 Outlet Pressure".
Set the main pump pressure using load valve (D2) on the flow meter to 16000 500 kPa (2321 73 psi).
Use the arrows to adjust the flow until the flow reading for the flow limit valve is at 400 2 L/min (79.3 0.5 US gpm). Press the device for activation 3 times and release the device for activation 3 times for each adjustment.
Repeat Steps 12 and 13 until the flow meter reads 400 2 L/min (79.3 0.5 gpm) and the pressure gauge reads 16000 500 kPa (2321 73 psi).
Press the OK key.
Illustration 15 g03366201
If calibration was successful and no errors occurred, the display will indicate that the calibration is complete.
Illustration 16 g03366206
The "Error" screen will be displayed on the monitor if an error occurs. The process of calibration will not be saved and the process must be restarted.Test Procedure
Confirm the calibration using the following procedure and specifications. Refer to Table 2 for the load pressure and flow specifications.Note: This procedure is typical for both proportional reducing valves for pump flow limit.
Enter the service mode.
Illustration 17 g02283177
Select "Main Pump Flow Limit" from the "Device Test" menu.
Illustration 18 g02283214
Select the test for the appropriate valve from the "Main Pump Flow Limit" menu.
Press the OK key in order to start the test.
Confirm the notes on the monitor display. Set up the test conditions in accordance with the instructions. Press the OK key.
Illustration 19 g03590057
Portable hydraulic tester (flow meter)
Illustration 20 g03366215
Set the main pump pressure using load valve (D2) on the flow meter. Use the arrows to adjust the flow. Refer to Table 2 for the load pressures and flow specifications.Note: Use the arrows to scroll down to view the machine "Engine Speed", "Hydraulic Oil Temperature", and "Pump Outlet Pressures".
Table 2
"Solenoid Valve (Proportional Reducing) - Calibrate (Main Pump Flow Limit)"
Date
Press and hold the control input for activation of the work tool to the FULL ON position during calibration.Note: Use the arrows to scroll down to view the machine "Engine Speed", "Hydraulic Oil Temperature", "Pump #1 Outlet Pressure", and "Pump #2 Outlet Pressure".
Set the main pump pressure using load valve (D2) on the flow meter to 16000 500 kPa (2321 73 psi).
Use the arrows to adjust the flow until the flow reading for the flow limit valve is at 200 2 L/min (52.8 0.5 US gpm). Press the device for activation 3 times and release the device for activation 3 times for each adjustment.
Repeat Steps 7 and 8 until the flow meter reads 200 2 L/min (52.8 0.5 gpm) and the pressure gauge reads 16000 500 kPa (2321 73 psi).
Press the OK key.
Illustration 14 g03591697
Note: Refer to Illustration 9 for the control input.
Press and hold the control input for activation of the work tool to the FULL ON position during calibration.Note: Use the arrows to scroll down to view the machine "Engine Speed", "Hydraulic Oil Temperature", "Pump #1 Outlet Pressure", and "Pump #2 Outlet Pressure".
Set the main pump pressure using load valve (D2) on the flow meter to 16000 500 kPa (2321 73 psi).
Use the arrows to adjust the flow until the flow reading for the flow limit valve is at 400 2 L/min (79.3 0.5 US gpm). Press the device for activation 3 times and release the device for activation 3 times for each adjustment.
Repeat Steps 12 and 13 until the flow meter reads 400 2 L/min (79.3 0.5 gpm) and the pressure gauge reads 16000 500 kPa (2321 73 psi).
Press the OK key.
Illustration 15 g03366201
If calibration was successful and no errors occurred, the display will indicate that the calibration is complete.
Illustration 16 g03366206
The "Error" screen will be displayed on the monitor if an error occurs. The process of calibration will not be saved and the process must be restarted.Test Procedure
Confirm the calibration using the following procedure and specifications. Refer to Table 2 for the load pressure and flow specifications.Note: This procedure is typical for both proportional reducing valves for pump flow limit.
Enter the service mode.
Illustration 17 g02283177
Select "Main Pump Flow Limit" from the "Device Test" menu.
Illustration 18 g02283214
Select the test for the appropriate valve from the "Main Pump Flow Limit" menu.
Press the OK key in order to start the test.
Confirm the notes on the monitor display. Set up the test conditions in accordance with the instructions. Press the OK key.
Illustration 19 g03590057
Portable hydraulic tester (flow meter)
Illustration 20 g03366215
Set the main pump pressure using load valve (D2) on the flow meter. Use the arrows to adjust the flow. Refer to Table 2 for the load pressures and flow specifications.Note: Use the arrows to scroll down to view the machine "Engine Speed", "Hydraulic Oil Temperature", and "Pump Outlet Pressures".
Table 2
"Solenoid Valve (Proportional Reducing) - Calibrate (Main Pump Flow Limit)"
Date
Caterpillar parts catalog:
Parts bearing Caterpillar catalog:
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B FM LL, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320...
311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318D L, 318D2 L, 318E L, 320...
311C, 312C, 312C L, 314C, 315C
315C, 315D L, 318D L, 318D2 L, 319D, 319D L, 319D LN, 320C, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 ...
311D LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 313D, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR, 315C, 315D L, 316E L, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, ...
311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318D L, 318D2 L, 318E L, 319...
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, ...
315D L, 316E L, 318C, 318D L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, ...
1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 318B, 318C, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320E LN, 321D LCR, 323D L, 323D LN, 323D SA, 323E L, 325B L, 325C, 325D L, 330B L, 330C, 330D L,...
311D LRR, 312C L, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D L, 319D LN, 320C, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
1090, 1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 318B, 320B, 320C, 322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325B L, 325C, 325C FM, 325C L, 325D MH, 330C, 34...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 318B, 318C, 319C, 319D, 319D L, 319D LN, 323D L, 323D LN, 324D, 324D FM, 324D L, 324D LN, 324E L, 324E LN, 325, 325 LN, 325D, 325D FM, 325...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 318B, 320 L, 320B, 320N, 322, 322 FM L, 322 LN, 322B L, 322C FM, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325D L, 330, 330 FM L, 330C, 330D...
318B, 320 L, 322B L, 325, 325 LN, 325B L, 330B L, M320, M322C, M322D, M322D MH
318B, 320 L, 320B, 320N, 322, 322 FM L, 322 LN, 322B L, 322C FM, 325, 325 L, 325 LN, 325B L, 330, 330 FM L, 330B L, 345B L, 350, 350 L, 5080, HYDRAULIC, M315C, M315D, M316C, M316D, M317D 2, M320, M322...
1475838
BEARING-SLEEVE
318B, G107B, HYDRAULIC, M318C, M318C MH, M318D MH, M322C, M322D, M322D MH, M325C MH, M325D MH
318B, G107B, HYDRAULIC, M318C, M318C MH, M318D MH, M322C, M322D, M322D MH, M325C MH, M325D MH
301.5, R2900G, R3000H
3119651
BEARING AS
301.5, 301.6C
301.5, 301.6C
3119646
BEARING
301.5, 301.6C
301.5, 301.6C
1709964
BEARING
308E, 308E CR, 308E SR, 318B, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336E, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, M330D, W345C MH
308E, 308E CR, 308E SR, 318B, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336E, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, M330D, W345C MH
1709965
BEARING
308E, 308E CR, 308E SR, 318B
308E, 308E CR, 308E SR, 318B
311C, 313D2 LGP, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B FM LL, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320...