1501891 BEARING Caterpillar parts
797
Rating:
Alternative (cross code) number:
CA1501891
150-1891
1501891
CA1501891
150-1891
1501891
Weight: 61 pounds 27 kg.
Information:
ID
160
mm
INNER BEARING LENGTH
135
mm
OD
260
mm
OUTER RACE LENGTH
100
mm
INNER BEARING MATERIAL
HARDENED
OUTER RACE MATERIAL
CASE CARB
TRUCK,
Compatible equipment models: 1501891:
Number on catalog scheme:
9
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install" for the correct procedure.
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove" for the correct procedure.
If the engine has an accessory drive, remove the accessory drive. Refer to Disassembly and Assembly, "Accessory Drive - Remove and Install" for the correct procedure.
Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove" for the correct procedure.
Remove the timing gears. Refer to Disassembly and Assembly, "Gear Group (Front) - Remove and Install" for the correct procedure.
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g02488340
Slide locking tab (1) (not shown) into the unlocked position.
Disconnect harness assembly (2) from coolant temperature sensor (3).
Cut cable strap (4) and remove harness assembly (2) from bypass tube (5).
Remove bolts (6) that secure bypass tube (5) to front housing (7).
Remove bypass tube (5) from the cylinder head. Remove O-ring seal (8) and O-ring seal (9) from bypass tube (5).
Illustration 2 g02488341
Remove bolts (10), bolts (11) and bolts (12) from front housing (7). Note: The bolts are three different lengths. Note the positions of the different bolts.
Remove front housing (7) from the cylinder block.
Remove gasket (13).
Illustration 3 g02488356
Remove thrust washer (14) from cylinder block (15).
Start By:
Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Pulley - Remove and Install" for the correct procedure.
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove" for the correct procedure.
If the engine has an accessory drive, remove the accessory drive. Refer to Disassembly and Assembly, "Accessory Drive - Remove and Install" for the correct procedure.
Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove" for the correct procedure.
Remove the timing gears. Refer to Disassembly and Assembly, "Gear Group (Front) - Remove and Install" for the correct procedure.
Remove the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g02488340
Slide locking tab (1) (not shown) into the unlocked position.
Disconnect harness assembly (2) from coolant temperature sensor (3).
Cut cable strap (4) and remove harness assembly (2) from bypass tube (5).
Remove bolts (6) that secure bypass tube (5) to front housing (7).
Remove bypass tube (5) from the cylinder head. Remove O-ring seal (8) and O-ring seal (9) from bypass tube (5).
Illustration 2 g02488341
Remove bolts (10), bolts (11) and bolts (12) from front housing (7). Note: The bolts are three different lengths. Note the positions of the different bolts.
Remove front housing (7) from the cylinder block.
Remove gasket (13).
Illustration 3 g02488356
Remove thrust washer (14) from cylinder block (15).
Caterpillar parts catalog:
Parts bearing Caterpillar catalog:
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797, 797B...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797...
3512B, 3512C, 3516B, 3516C, 785D, 789C, 789D, 793C, 793D, 797, 797B, 994F, 994H, G3516H, PM3516, SPF343C, TH48-E80, XQC1200, XQC1600
3512B, 3512C, 3516B, 3516C, 785D, 789C, 789D, 793C, 793D, 797, 797B, 994F, 994H, G3516H, PM3516, SPF343C, TH48-E80, TH55-E70, XQC1200, XQC1600
572R, 572R II, 583R, 583T, 587R, 587T, 735, 797, D7E, D7E LGP, D7H, D7R, D7R II, D7R XR, D8N, D8R, D8R II, D8T, PL83, PL87, TH35-C11I, TH35-C13I, TH35-C13T, TH35-C15I, TH35-C15T, TH35-E81
120H, 120M, 120M 2, 12H, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140H, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H, 14M, 160H, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H, 16H, 2470C, 2570C, 2670C, 330C, 330C ...
120H, 120M, 12H, 12M, 135H, 140H, 140M, 143H, 14H, 14M, 160H, 160M, 163H, 16H, 2470C, 2570C, 2670C, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D...
518, 518C, 528, 528B, 530B, 797, 797B, 797F, 920, 930, 941, 951B, D4D, D4E
784B, 784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 797, 797B, 993K, 994, 994D, 994F, 994H, D11R, D11T
797, 834G, 834H, 836G, 836H, 844K, 854K, 988G, 988H, 990K, 992K, 993K, D8T, D9T
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 135H, 135H NA, 784C, 785C, 785D, 789C, 789D, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, 844K, 854K, 990K, 99...
784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 797
1548546
BEARING
797, 797B, 797F
797, 797B, 797F
1716493
BEARING AS
797, 797B
797, 797B
1716494
BEARING AS
795F AC, 795F XQ, 797, 797B, 797F
795F AC, 795F XQ, 797, 797B, 797F
1700498
BEARING AS
795F AC, 795F XQ, 797, 797B, 797F
795F AC, 795F XQ, 797, 797B, 797F
1397641
BEARING
797, 797B
797, 797B
1929970
BEARING
797, 797B
797, 797B
1501889
BEARING
795F AC, 795F XQ, 797, 797B, 797F
795F AC, 795F XQ, 797, 797B, 797F
795F AC, 795F XQ, 797, 797B, 797F
795F AC, 795F XQ, 797, 797B, 797F
1501892
BEARING
797
797
1914427
BEARING-SPECIAL
795F AC, 795F XQ, 797, 797B, 797F
795F AC, 795F XQ, 797, 797B, 797F