1527554 BEARING-SELF-ALIGNING Caterpillar parts
854G, 854K, D11N, D11R, D11T
Rating:
Alternative (cross code) number:
CA1527554
152-7554
1527554
CA1527554
152-7554
1527554
Weight: 15 pounds 6 kg.
Information:
ID
101.6
mm
INNER BEARING LENGTH
88.9
mm
OD
158.75
mm
OUTER RACE LENGTH
76.2
mm
TRACK-TYPE TRACTOR, WHEEL DOZER,
You can buy:
US$163.56
28 May 2025
FridayParts
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 1527554 Spherical Bearing for Heavy Equipment
CTP Spherical Bearing Only || Sold in each || Easy in-and-out fit
CTP Spherical Bearing Only || Sold in each || Easy in-and-out fit
1527554 Spherical Bearing (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Fits equipment: ENGINE - MACHINE: 3508, 3508B, C32; TRACK-TYPE TRACTOR: D11N, D11R, D11T; WHEEL DOZER: 854G, 854K; WORK TOOL: 836G, 834G, !. ENGINE - MACHINE: 3508, 3508B, C32; TRACK-TYPE TRACTOR: D11N, D11R, D11T; WHEEL DOZER: 854G, 854K. || Condition: NEW AFTERMARKET || Weight: 17.05 lbs || Dimensions: 10-10-11.69 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Fits equipment: ENGINE - MACHINE: 3508, 3508B, C32; TRACK-TYPE TRACTOR: D11N, D11R, D11T; WHEEL DOZER: 854G, 854K; WORK TOOL: 836G, 834G, !. ENGINE - MACHINE: 3508, 3508B, C32; TRACK-TYPE TRACTOR: D11N, D11R, D11T; WHEEL DOZER: 854G, 854K. || Condition: NEW AFTERMARKET || Weight: 17.05 lbs || Dimensions: 10-10-11.69 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
1527554 Spherical Bearing (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 17.05 lbs || Dimensions: 10-10-11.69 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 17.05 lbs || Dimensions: 10-10-11.69 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
This part in 2 request:
Show.
This information for suppliers only!
2020-08-17
2018-04-02
Number on catalog scheme:
6
For full view, you need register
Compatible equipment models: 1527554:
Information:
Illustration 1 g00928705
(A and B) Fuel outlet
(1) Fuel priming pump
(2) Fuel filter The pressure test measures the output pressure of the fuel priming pump. Low fuel pressure and starting difficulty may be indications of problems with the fuel priming pump.Check the Function of the Fuel Priming Pump
Make a note of the location of the fuel lines from the fuel priming pump. Remove the two lines from the outlets (A) and (B).
Connect two lengths of 5/16 inch rubber hose to outlets (A) and (B). Place the hoses into a suitable container that is capable of holding 3 L (3.17 qt) of fuel.
Energize the fuel priming pump until a constant flow of fuel is running from the outlet for the supply for the fuel injection pump. Note: The flow from the outlet for the return for the fuel tank will have a slower flow rate.
Measure the combined flow of both outlets with a stopwatch. Fuel flow should be a minimum of 2 L/min (0.53 US gpm).
If the combined flow is less than 2 L/min (0.53 US gpm), repair the pump or replace the pump.
Reconnect the outlet lines in the correct positions.
Start the engine and check for any leakage of fuel or air from the fuel lines. Check the Function of the Pressure Regulator
Remove the fuel line from the outlet for the supply for the fuel injection pump (B).
Install a pipe with a tap for a pressure gauge. Connect a 0 to 80 kPa (0 to 12 psi) pressure gauge.
Start the engine and run the engine at idle for two minutes in order to remove any trapped air.
Record the pressure reading at idle and at high idle. The pressure reading should be the following values: Delphi DP310 Idle ... 25 kPa (3.63 psi)High Idle ... 25 kPa (3.63 psi)Note: Maximum pressure for the fuel injection pump is 75 kPa (10.88 psi).
Turn the key to the RUN position for three minutes in order to energize the fuel priming pump. Do not start the engine. Then turn the key to the OFF position. Check for the following issues if the pressures are outside of the above specifications.
All electrical connections are installed correctly.
There are no leaks in the fuel lines or connections.
The O-ring on fuel filter housing (2) does not leak.
Cat SIS web machinery list:
Parts bearing Caterpillar catalog:
D11N, D11R, D11T
D11N, D11R, D11T
D10N, D10R, D10T, D10T2, D11R, D11T
D11N, D11R, D11T
854G, D10N, D10R, D10T, D10T2, D9L
854G, D9L
D11N, D11R
D11N, D11R, D11T
D11N, D11R, D11T
10S, D10, D11N
854G, 854K, D11N, D11R
D11R, D11T
D11N, D11R, D11T
D11N, D11R, D11T
D11N, D11R
6Y3551
BEARING
D11N
D11N
D10, D11N, D11R
D11N, D11R
D10N, D10R
D10N, D10R
8P6998
BEARING-SLEEVE
D10N, D9L
D10N, D9L
854G, 854K, D11N, D11R
4T6767
BEARING AS
854G, 854K, D11N, D11R
854G, 854K, D11N, D11R
10S, D10, D11N