BEARING-ROLLER 1655804 - Caterpillar

Illustration 1 g03597836
Table 1
Specification for 261-8536 Blade Lift Gp    
Item     Qty     Part     Specification Description    
1     1     288-0735 Bolt     Torque to 50 10 N m (36.87800 7.37560 lb ft).    
2     As required, use the thrust washers to obtain minimum gap between lift arm and frame center shift plates.
Note: First shim shall be placed in rear of the joint. For any additional shims being used, split between the front and rear as best as possible.    
2 8D-4336 Thrust Washer     Thickness of one thrust washer is
1.90 0.18 mm (0.075 0.007 inch).    
4     As required, use the shims to obtain maximum end play of
0.25 mm (0.010 inch). So yoke assembly (3) will rotate without binding.    
8 7D-8879 Shim     Thickness of one shim is
0.13 mm (0.005 inch).    
6 7D-8881 Shim     Thickness of one shim is
0.25 mm (0.010 inch).    
2 7D-8882 Shim     Thickness of one shim is
0.51 mm (0.020 inch).    
5     1     8X-5107 Pin     Diameter is
60.26 0.03 mm (2.372 0.001 inch).    
Illustration 2 g03597856
View of area C
Table 2
Item     Qty     Part     Specification Description    
-     Do not use impact type driver to assemble bearings.    
6     1     7D-8889 Bearing     Diameter is
76.352 0.050 mm (3.0060 0.0020 inch).    
7     1     8D-8168 Bearing     Diameter is
63.65 0.05 mm (2.506 0.002 inch).