1727810 BEARING Caterpillar parts
5110B
Rating:
Alternative (cross code) number:
CA1727810
172-7810
1727810
CA1727810
172-7810
1727810
Weight: 20 pounds 9 kg.
Information:
ID
170.42
mm
OD
194.37
mm
WIDTH
170
mm
MINING EXCAVATOR,
This part in 2 request:
Show.
This information for suppliers only!
2023-07-02
2023-06-09
Compatible equipment models: 1727810:
Number on catalog scheme:
3
For full view, you need register
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: The installation procedure is similar for the two cylinder, the three cylinder and the four cylinder engines. The illustrations show the four cylinder engine.
Clean the mounting face of the fuel injection pump on the cylinder block. Clean the mating surface of the fuel injection pump.
Illustration 1 g00825132
Typical example
Install the correct thickness and the correct number of shims (3) on the mounting face of the cylinder block. Refer to Specifications, "Fuel Injection Pump".
Illustration 2 g00825137
Typical example
Position the fuel injection pump (1) close to the mounting face of the cylinder block, and connect the link (6) and the fuel rack control (5) with the clip (7).
Put fuel injection pump (1) in position on the mounting face of the cylinder block.
Install the setscrews (4) and the nuts (2) that fasten the fuel injection pump to the cylinder block. For C0.5, C0.7, C1.1/3011C and C1.6 engines, tighten the setscrews (4) and the nuts (2) to a torque of 6 N m (53 lb in).For C1.5/3013C, C2.2/3024C and C2.2/3024CT engines, tighten the setscrews (4) and the nuts (2) to a torque of 15 N m (11 lb ft). End By:
Install the fuel shutoff solenoid. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install".
Install the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: The installation procedure is similar for the two cylinder, the three cylinder and the four cylinder engines. The illustrations show the four cylinder engine.
Clean the mounting face of the fuel injection pump on the cylinder block. Clean the mating surface of the fuel injection pump.
Illustration 1 g00825132
Typical example
Install the correct thickness and the correct number of shims (3) on the mounting face of the cylinder block. Refer to Specifications, "Fuel Injection Pump".
Illustration 2 g00825137
Typical example
Position the fuel injection pump (1) close to the mounting face of the cylinder block, and connect the link (6) and the fuel rack control (5) with the clip (7).
Put fuel injection pump (1) in position on the mounting face of the cylinder block.
Install the setscrews (4) and the nuts (2) that fasten the fuel injection pump to the cylinder block. For C0.5, C0.7, C1.1/3011C and C1.6 engines, tighten the setscrews (4) and the nuts (2) to a torque of 6 N m (53 lb in).For C1.5/3013C, C2.2/3024C and C2.2/3024CT engines, tighten the setscrews (4) and the nuts (2) to a torque of 15 N m (11 lb ft). End By:
Install the fuel shutoff solenoid. Refer to Disassembly and Assembly, "Fuel Shutoff Solenoid - Remove and Install".
Install the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".
Caterpillar parts catalog:
Parts bearing Caterpillar catalog:
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 235, 24H, 30/30, 3114,...
16G, 16H NA, 245, 245B, 24H, 24M, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C ...
16G, 16H NA, 245, 24H, 24M, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385...
16G, 16H NA, 245D, 24H, 24M, 3126, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 3516, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS...
16G, 16H NA, 245, 245B, 245D, 24H, 3406, 3406B, 3406C, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 375, 375 L, 5080, 5110B, 578, 583R, 587R, 589, 621, 621B, 621E, 621F, 623E, 623F, 627B, 627...
3412, 3412C, 3412D, 3412E, 5110B, 651E, 657E, 773B, 775B, 990, 992C, 992D, C-10, CG137-12, D10N, D10R, D10T, D10T2, D11R, D11T, D9L, G3412, G3412C, PM3412, PR-1000, PR-750B, SCT673, SPS342, SPT342
24H, 3406B, 3406C, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 5110B, 589, 631D, 631E, 631G, 633E II, 637E, 637G, 651E, 657E, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 775B, 775D, 775E, 834B, 836, 844, 98...
16G, 245, 3406, 3406B, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 5110B, 578, 589, 621E, 623E, 627E, 631E, 637E, 651E, 657E, 69D, 772B, 775B, 826C, 836, 980C, 988B, 992C, AD40, AD45, AE40, AE40 II...
16G, 245, 24H, 3406, 3406B, 3406C, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 5110B, 578, 589, 621E, 623E, 627E, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 651E, 657E, 769C, 769D, 771C, 771D, 77...
3408, 3408C, 3412, 3412C, 3412D, 5110B, 5130, 5130B, 621, 627, 631E, 637D, 637E, 651, 651E, 657E, 666, 769C, 771C, 773B, 775B, 988B, 990, 992C, 992D, PM3412, PR-1000, PR-450C, PR-750B
245, 3406, 3406B, 3406C, 3406E, 3408, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5090B, 5110B, 578, 583R, 587R, 589, C-15,...
245, 3406, 3406B, 3406C, 3406E, 3408, 365C, 365C L, 365C L MH, 375, 375 L, 385B, 5080, 5090B, 5110B, 578, 583R, 589, C-15, C-16, C15, D10N, D10R, D10T, D10T2, D11R, D11T, D8L, D8N, D8R, D8R II, D9L, D...
1727808
BEARING
5110B
5110B
1727799
BEARING
5110B
5110B
1727812
BEARING
5110B
5110B
1727811
BEARING
5110B
5110B
1727787
BEARING
5110B
5110B
1681850
BEARING
5110B
5110B
330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 385B, 385C, 3...
1941156
BEARING-IDLER
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
1994670
BEARING AS
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
365B II, 365C, 365C L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5090B
1912505
BEARING AS
385B, 5090B
385B, 5090B