BEARING AS-SWING 1937034 - Caterpillar

Table 1
Sales Models 725, 730, 730 Ejector, 735, and 740    
New Part     Description     Former Part    
308-6000     Yoke As     139-2245    
308-6001     Yoke As     280-1623    
308-6002     Yoke As     188-3776    
308-6003     Yoke As     166-7711    
308-6005     Yoke As     159-4637    
Table 2
Location of the Yoke Assemblies    
Model     Front Axle     Center Axle (Input)     Center Axle (Output)     Rear Axle    
725     N/A     308-6002     308-6003     N/A    
730 and 730 Ejector     N/A     308-6002     308-6003     N/A    
735 (S/N: AWR1-UP; B1N1-879)     308-6000     308-6005     308-6001     308-5999    
735S/N:B1N880-UP     308-6000     308-6005     308-6001     308-6000    
740     308-6000     308-6005     308-6001     308-6000    Adaptable To: The part numbers for the newyoke assemblies that are replacing the former yoke assemblies can be found in Table 1. The yoke assemblies are located on various locations on the machines. Refer to Table 2 in order to identify the location of each yoke assembly. The new yoke assemblies became effective in production with the following machines: (S/N: B1L1845-UP), (S/N: B1M1880-UP), (S/N: B1W320-UP), (S/N: B1N1055-UP), (S/N: B1P3185-UP), and (S/N: B1R399-UP)The new yoke assemblies are adaptable back to the first production of the listed machines.