BEARING AS-ROLLER 1939226 - Caterpillar

Illustration 1 g02759638
(2) Bucket cylinder group
(3) Stick cylinder group
(4) Bucket linkage group
(5) Bucket group
(6) Boom group
Table 1
Specification for 282-4536 Hoe Stick Gp, and 284-7161 Hoe Stick Gp
Item Qty Part Specification description
All bores must be free of paint. Use 5P-0960 Grease Cartridge to coat all bores for the pins, the bucket, and the cylinder pin bores.
1 - - The stick cylinder must be assembled in order to orient the grease zerk, as shown.
7 1 4I-4811 Pin As Diameter is 69.850 0.025 mm (2.7500 0.0010 inch).
8 1 4I-4809 Pin As Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
9 2 166-1495 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
10 2 235-7679 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
11 2 166-1494 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
Install the following bushings in the bore so that the part number of the bushing is facing outward.
12 The bushing (12) is one of the following part numbers:
2 228-5615 Bushing Bore of the bushing before installation is 90.25 0.04 mm (3.553 0.002 inch).
Installation depth of the bushing is 9.5 0.8 mm (0.37 0.03 inch).
2 244-4277 Bushing Bore of the bushing before installation is 90.16 0.02 mm (3.550 0.001 inch).
Installation depth of the bushing is 9.5 0.8 mm (0.37 0.03 inch).
13 2 229-1096 Bushing Bore of the bushing before installation is 70.17 0.04 mm (2.763 0.002 inch).
Installation depth of the bushing is 9.5 0.8 mm (0.37 0.03 inch).
14 2 240-2913 Bushing Bore of the bushing before installation is 80.20 0.04 mm (3.157 0.002 inch).
Installation depth of the bushing is 9.5 0.8 mm (0.37 0.03 inch).