BEARING GP-MAIN 1958231 - Caterpillar

Illustration 1 g01342497
Assemble the cut that is in the 219-2434 Wear Rings within the dimension that is specified of 45 10 degrees. The first diagonal cut is at position (A) and the second diagonal cut is at position (B) . (1) Torque for 40 nuts ... 240 40 N m (177 30 lb ft)Note: Check the torque with a torque wrench at the following positions:
Twelve o'clock
Six o'clock
Three o'clock
Nine o'clock (2) Torque for 36 bolts ... 240 40 N m (177 30 lb ft)Note: Do not use the four bolts in the corners to pull the final drive housing into initial contact with the tandem. (3) Torque for 32 bolts ... 270 15 N m (200 11 lb ft) (4) Lubricate the sealing lip slightly with the lubricant that is being sealed. (5) Ensure that the 282-4351 Lip Type Seal is flush with the end of the housing. (6) Coat the surfaces of the washer with 6V-4876 Lubricant . (7) Lightly coat the surface with 6V-4876 Lubricant . (8) To achieve 0.063 0.038 mm (0.0025 0.0015 inch) end play, use the shim pack. 8X-3364 Shim Pack Total thickness of shim pack ... 1.10 0.25 mm (0.043 0.010 inch) Total thickness of four shims ... 0.20 mm (0.008 inch) Total thickness of six shims ... 0.05 mm (0.002 inch) (9) Assemble so that the sprockets on both teeth are not aligned with each other.