BEARING 1958299 - Caterpillar

Illustration 1 g00866951
(1) Torque for bolt ... 129 7 N m (95 5 lb ft)
Illustration 2 g00008195
Section A-A (3) Thickness of 7D-8879 Shim ... 0.13 mm (0.005 inch) (4) Thickness of 7D-8881 Shim ... 0.25 mm (0.010 inch) (5) Thickness of 7D-8882 Shim ... 0.51 mm (0.020 inch)To achieve maximum shaft end play of 0.25 mm (.009 inch) in yoke assembly (2), use 7D-8879 Shim (3), 7D-8881 Shim (4), and 7D-8882 Shim (5), as required. This will allow the yoke assembly to rotate without binding. (6) Thickness of 9D-1530 Thrust Washer ... 1.91 0.18 mm (0.075 0.007 inch) (7) Thickness of 124-0360 Thrust Washer ... 1.0 mm (0.04 inch)As required, use 9D-1530 Thrust Washer (6) and 124-0360 Thrust Washer (7) in order to obtain a minimum gap.