BEARING 1G5764 - Caterpillar

Install the guard, as shown. Mount the clamp 451 2 mm (17.76 .08 inch) (A) from the rod end of the cylinder, as shown.213-7298 Baffle
The 213-7298 Baffle is available for the 966G (S/N: 3SW1-768; 3ZS1-489; 3PW1-767; 9RS1-995; 8XW1-367; AAH1-348) Wheel Loaders, all of the 966G and 966G Series II Wheel Loaders that are equipped with a logging arrangement, all 966G and 966G Series II Wheel Loaders that are equipped with a waste arrangement, 972G (S/N: 7LS1-UP; 4WW1-UP; 6AW1-UP; 1EW1-UP; 7PL1-UP; AAW1-UP) Wheel Loaders and 972G Series II S/N:AWP1-UP
S/N:; ANY1-UP
S/N:; AXN1-UP
S/N:; AXC1-UP
S/N:; AXP1-UP
S/N:; AXE1-UP
Wheel Loaders.
Illustration 3 g00934960
Table 2
Parts List    
Item     Part Number     Quantity     Description    
1     6W-5458     2     Spacer    
2     8T-6431     2     Rod End    
3     213-7300     2     Plate    
4     213-7301     2     Baffle    
5     213-7303     2     Bracket    
6     213-7305     2     Plate Assembly    
7     213-7306     2     Clamp    
8     213-7308     2     Clamp Assembly    
9     213-7310     2     Plate Assembly    
10     131-5879     4     Washer    
11     8T-4121     12     Hard Washer    
12     8T-4196     14     Bolt    Install the guard, as shown. Mount the clamp 480 10 mm (18.89 .4 inch) (A) from the rod end of the cylinder, as shown.213-7299 Baffle
The 213-7299 Baffle is available for 966G (S/N: 3SW769-UP; 3ZS490-UP; 3PW768-UP; 9RS996-UP; 8XW368-UP; AAH349-UP) Wheel Loaders and 966G Series II (S/N: ANZ1-UP; ANT1-UP; AXJ1-UP; AWY1-UP; AXL1-UP; AWZ1-UP).
Illustration 4 g00934960
Table 3
Parts List    
Item     Part Number     Quantity     Description    
1     6W-5458     2     Spacer    
2     8T-6431     2     Rod End    
3     213-7300     2     Plate    
4     213-7302     2     Baffle    
5     213-7303     2     Bracket    
6     213-7305     2     Plate Assembly    
7     213-7306     2     Clamp    
8     213-7308     2     Clamp Assembly    
9     213-7310     2     Plate Assembly    
10     131-5879     4     Washer    
11     8T-4121     12     Hard Washer    
12     8T-4196     14     Bolt    Install the guard, as shown. Mount the clamp 480 10 mm (18.89 .4 inch) (A) from the rod end of the cylinder, as shown.