BEARING-SLEEVE 1M6697 - Caterpillar

Illustration 1 g01217976
(1) Latch
(2) Cover
Open four latches (1) in order to unlock cover (2).
Remove the cover.
Clean cover (2).
Illustration 2 g02003304
(3) Primary filter element
(4) Handle
Pull up on handle (4) in order to remove primary filter element (3).
Clean the inside of the air cleaner housing.
Inspect the primary element. If the pleats, the gaskets, or the seals are damaged, discard the element. Replace a damaged primary element with a clean primary element. A primary element may be cleaned for a maximum of five times. Also replace the primary element if the primary element has been used for 2 years.
Do not clean the filter elements by bumping or tapping them. Do not use filter elements with damaged pleats, gaskets, or seals. Do not wash the filter elements.
If the primary element is not damaged, clean the primary element. The filter elements can be cleaned with pressurized air.If you use pressurized air, use a maximum air pressure of 205 kPa (30 psi).
Illustration 3 g02003305
When you clean the inside pleats and the outside pleats, direct the air along the pleats.
Inspect the filter elements after you clean the filter elements. Do not use a filter if the pleats, the gaskets, or the seals are damaged.
Cover the clean filter elements. Store the elements in a clean, dry location.
Install a clean primary filter element. Lower the handle in order to secure the new primary filter in the air cleaner housing.
Install cover (2).
Close four latches (1) in order to lock cover (2) in place.
Close the access door.