1U1187 BEARING AS Caterpillar parts
D10N, D10R, D10T, D10T2, D9L
Rating:
Alternative (cross code) number:
CA1U1187
1U-1187
1U1187
CA1U1187
1U-1187
1U1187
Weight: 103 pounds 46 kg.
TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 1U1187 Bearing Cap Assembly
CTP Bearing Cap Assembly Only || Sold in each || Easy in-and-out fit
CTP Bearing Cap Assembly Only || Sold in each || Easy in-and-out fit
1U1187 Bearing A (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 106.7 lbs || Dimensions: 10.38-18.19-11.69 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 106.7 lbs || Dimensions: 10.38-18.19-11.69 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
8
For full view, you need register
Information:
Replace the engine oil filters when any of the following conditions are met:
The engine oil is changed.
The engine oil filter differential pressure reaches 100 kPa (15 psi).
The engine oil filters have been used for 1000 operating hours.Replace the Oil Filter Elements
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Ensure that the engine is stopped before performing this procedure. Attach a DO NOT OPERATE tag to the starting controls.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01441663
Remove oil drain plug (1). Drain the oil into a suitable container.
Remove spin-on oil filters (2) with a Cat filter strap wrench.
Reinstall the oil drain plug.
Illustration 2 g00103713
Mounting base and gasket
Clean the sealing surface of the mounting base. Ensure that all of the old gasket is removed.
Apply clean engine oil to the gasket of the new oil filter.
Caterpillar oil filters are built to Caterpillar specifications. Use of an oil filter not recommended by Caterpillar could result in severe engine damage to the engine bearings, crankshaft, etc., as a result of the larger waste particles from unfiltered oil entering the engine lubricating system. Only use oil filters recommended by Caterpillar.
Place the oil filter in position. Tighten the oil filter by hand until the gasket contacts the base. Tighten the oil filter by hand for an additional 1 full turn (360 degrees). Do not overtighten the oil filter.
Check the oil level according to the instructions in this Operation and Maintenance Manual, "Engine Oil Level - Check". Inspect the Used Oil Filter Elements
Cut the used oil filter element open with a Cat filter cutting tool.Remove the metal wrap. Cut the filter element free from the end caps. Spread apart the pleats and inspect the element for metal debris. Due to normal wear and friction, small amounts of debris may be found in the oil filter element. An excessive amount of debris in the element may indicate early wear or a pending failure. If an excessive amount of debris is found in the oil filter element, consult your Cat dealer in order to arrange for further oil analysis.Use a magnet to differentiate between the ferrous metals and the nonferrous metals that are found in the element. Ferrous metals may indicate wear on the steel and the cast iron parts of the engine. Nonferrous metals may indicate wear on the aluminum parts, the brass parts, or the bronze parts of the engine. Parts that may be affected include the following components: main bearings, rod bearings, turbocharger bearings and cylinder heads.
The engine oil is changed.
The engine oil filter differential pressure reaches 100 kPa (15 psi).
The engine oil filters have been used for 1000 operating hours.Replace the Oil Filter Elements
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Ensure that the engine is stopped before performing this procedure. Attach a DO NOT OPERATE tag to the starting controls.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01441663
Remove oil drain plug (1). Drain the oil into a suitable container.
Remove spin-on oil filters (2) with a Cat filter strap wrench.
Reinstall the oil drain plug.
Illustration 2 g00103713
Mounting base and gasket
Clean the sealing surface of the mounting base. Ensure that all of the old gasket is removed.
Apply clean engine oil to the gasket of the new oil filter.
Caterpillar oil filters are built to Caterpillar specifications. Use of an oil filter not recommended by Caterpillar could result in severe engine damage to the engine bearings, crankshaft, etc., as a result of the larger waste particles from unfiltered oil entering the engine lubricating system. Only use oil filters recommended by Caterpillar.
Place the oil filter in position. Tighten the oil filter by hand until the gasket contacts the base. Tighten the oil filter by hand for an additional 1 full turn (360 degrees). Do not overtighten the oil filter.
Check the oil level according to the instructions in this Operation and Maintenance Manual, "Engine Oil Level - Check". Inspect the Used Oil Filter Elements
Cut the used oil filter element open with a Cat filter cutting tool.Remove the metal wrap. Cut the filter element free from the end caps. Spread apart the pleats and inspect the element for metal debris. Due to normal wear and friction, small amounts of debris may be found in the oil filter element. An excessive amount of debris in the element may indicate early wear or a pending failure. If an excessive amount of debris is found in the oil filter element, consult your Cat dealer in order to arrange for further oil analysis.Use a magnet to differentiate between the ferrous metals and the nonferrous metals that are found in the element. Ferrous metals may indicate wear on the steel and the cast iron parts of the engine. Nonferrous metals may indicate wear on the aluminum parts, the brass parts, or the bronze parts of the engine. Parts that may be affected include the following components: main bearings, rod bearings, turbocharger bearings and cylinder heads.
Caterpillar parts catalog:
Parts bearing Caterpillar catalog:
D10N, D10R, D10T, D10T2, D11R, D11T
D10N, D10R, D10T, D10T2, D9L
854G, D10N, D10R, D10T, D10T2, D9L
854G, D9L
D10N, D10R
D10N, D10R
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D9L
D10N, D10R, D9L
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D9L
D10N, D10R, D10T, D10T2
D10N, D10R, D10T, D10T2
D10N, D10R
D10N, D10R
8P6998
BEARING-SLEEVE
D10N, D9L
D10N, D9L
6E2300
BEARING
D9R
D9R
14G, D9R, D9T
D9R, D9T
D10N, D10R, D10T, D10T2
D10N, D10R, D9L