BEARING 1W1762 - Caterpillar

The hood, muffler and fuel lines are removed for better photo illustration. 1. Disconnect glow plug wire (1) from the glow plug.2. Remove the glow plug with tool (A).Install Glow Plugs
1. Put 5P3931 Anti-Seize Compound on the threads of glow plug (1).2. Install glow plug (1) and use tool (A) to tighten it to a torque of 10 2 lb.ft. (14 3 N m).3. Connect wire (2) to the glow plug.4. Use this procedure to install the remainder of the glow plugs.Remove Fuel Priming Pump
1. Remove two bolts (1) that hold fuel priming pump (2) to the fuel injection pump housing. Remove fuel priming pump (2) and the gasket.Install Fuel Priming Pump
1. If necessary, make a replacement of the fuel priming pump gasket. 2. Put fuel priming pump (1) in position on the fuel injection pump housing and install the bolts to hold it in place.