BEARING & HOUSING GP 2142297 - Caterpillar

Illustration 1.
Location of components for the modified 4P-3094 Shield Assembly (X).
Illustration 2.
Location of components for the modified 4P-3090 Shield Assembly (Y). 1. Remove the 4P-9030 Shield Assembly (Y) and 4P-9034 Shield Assembly (X) from the engine.2. Place the 154-3561 Straps (2) in the correct positions on the shield assemblies (X) and (Y). Use the holes in the strips (2) as a guide to mark the locations for the holes in the shield assemblies (X) and (Y).3. Drill 7/16inch holes through the shield assemblies (X) and (Y) at the locations marked in Step 2.4. Fasten the 154-3560 Flexible Shields (3) to the shield assemblies (X) and (Y) with 6V-8801 Nuts (1), 154-3561 Straps (2), 5M-2894 Washers (4), and 0S-1594 Bolts (5) as shown in Illustrations 1, 2, and 3.5. Install the modified shield assemblies (X) and (Y) on the engine.
Illustration 3.
(DETAIL A) Shield assembly (X) or (Y).