BEARING-PLAIN 2422921 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals, the seals, and the gaskets. Replace the O-ring seals, the seals, and the gaskets that are worn or damaged.Note: Lubricate the O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g01630037
Install gasket (9).
Illustration 2 g01629977
Install O-ring seals (8) and O-ring seal (7).
Illustration 3 g01629975
Install oil filter base (6). Install bolts (5). Connect harness assembly (4).
Illustration 4 g01629953
Connect hose assembly (3).
Illustration 5 g01629853
Install oil filter housing (2). Tighten oil filter housing (2) to a torque of 61 7 N m (45 5 lb ft). Note: Do not use an air wrench to tighten oil filter housing (2).
Install plug (1).