2552114 BEARING Caterpillar parts
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
Rating:
Alternative (cross code) number:
CA2552114
255-2114
2552114
CA2552114
255-2114
2552114
Weight: 41 pounds 18 kg.
TRACK-TYPE TRACTOR,
Compatible equipment models: 2552114:
Number on catalog scheme:
7
For full view, you need register
Information:
Assembly Procedure
Standard Idler Gear
Illustration 1 g01141806
Typical example
Lubricate the hub (3 ) with clean engine lubricating oil. Slide the hub (3) into the idler gear (1).
Ensure that the oil hole (2) is to the top of the hub (3) and ensure that the marks are to the front of the idler gear (1). Heavy-Duty Idler Gear
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-3263 Thread Lock Compound - Note: The new bearing assembly (6) is supplied with a protective sleeve. Do not remove this protective sleeve. The protective sleeve prevents the rollers from falling out of the roller bearings.
Illustration 2 g01150259Note: Ensure that the hub and the bearing are installed into the idler gear from the correct side of the gear. The marks on the gear teeth must face forward.
In order to assemble the heavy-duty idler gear, install the circlip (8) into the back face of the idler gear (5). Place the back face of the idler gear (5) onto a clean, flat surface. Insert the thrust washer (7) through the idler gear (5) and onto the circlip (8). Ensure that the flange face of the bearing assembly (6) is toward the bottom and that the protective sleeve is still in place. Insert the new bearing assembly (6) into the idler gear (5).
Push the new bearing assembly (6) into the idler gear (5) until the bearing assembly comes into contact with the thrust washer (7). As the bearing assembly (6) is pushed into the idler gear (5) the protective sleeve will remain on the top face of the idler gear.
Discard the protective sleeve. Install the thrust washer (4) and install the circlip (3).
Lightly lubricate the hub (9) with clean engine lubricating oil. Press the hub (9) into the idler gear (2).
Align the three setscrew holes in the plate (2) to the hub (9).
Apply Tooling (A) to the threads of the allen head screw (1). Note: The plate is marked with the word "TOP". This is for installation of the heavy-duty idler gear to the engine gear train.
Install the allen head screw (1). Tighten the allen head screw to 9 N m (6 lb ft).
Standard Idler Gear
Illustration 1 g01141806
Typical example
Lubricate the hub (3 ) with clean engine lubricating oil. Slide the hub (3) into the idler gear (1).
Ensure that the oil hole (2) is to the top of the hub (3) and ensure that the marks are to the front of the idler gear (1). Heavy-Duty Idler Gear
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-3263 Thread Lock Compound - Note: The new bearing assembly (6) is supplied with a protective sleeve. Do not remove this protective sleeve. The protective sleeve prevents the rollers from falling out of the roller bearings.
Illustration 2 g01150259Note: Ensure that the hub and the bearing are installed into the idler gear from the correct side of the gear. The marks on the gear teeth must face forward.
In order to assemble the heavy-duty idler gear, install the circlip (8) into the back face of the idler gear (5). Place the back face of the idler gear (5) onto a clean, flat surface. Insert the thrust washer (7) through the idler gear (5) and onto the circlip (8). Ensure that the flange face of the bearing assembly (6) is toward the bottom and that the protective sleeve is still in place. Insert the new bearing assembly (6) into the idler gear (5).
Push the new bearing assembly (6) into the idler gear (5) until the bearing assembly comes into contact with the thrust washer (7). As the bearing assembly (6) is pushed into the idler gear (5) the protective sleeve will remain on the top face of the idler gear.
Discard the protective sleeve. Install the thrust washer (4) and install the circlip (3).
Lightly lubricate the hub (9) with clean engine lubricating oil. Press the hub (9) into the idler gear (2).
Align the three setscrew holes in the plate (2) to the hub (9).
Apply Tooling (A) to the threads of the allen head screw (1). Note: The plate is marked with the word "TOP". This is for installation of the heavy-duty idler gear to the engine gear train.
Install the allen head screw (1). Tighten the allen head screw to 9 N m (6 lb ft).
Caterpillar parts catalog:
Parts bearing Caterpillar catalog:
12H, 12H NA, 140H, 140H NA, 236, 236B, 24H, 24M, 252B, 252B3, 262C, 262C2, 262D, 267B, 268B, 272C, 272D, 272D XHP, 287, 287C, 287C2, 287D, 289C, 289C2, 289D, 297C, 299C, 299D, 299D XHP, 30/30, 315C, 3...
267, 267B, 287, 906H, 906H2, 907H, 907H2, 908H, 908H2, AP1000E, AP1055E, BG1000E, BG1055E, CB-434B, CB-434C, CB-434D, CB-44B, CB-534C, CB-534D, CB-54, CB-54B, CB-564D, CB-634C, CB-634D, CD-54, CD-54B,...
120H, 12H NA, 140H NA, 14G, 14H, 14H NA, 14M, 16G, 16H, 16H NA, 16M, 216, 232B, 242B, 242B3, 242D, 247, 247B, 257B, 257B3, 257D, 259B3, 259D, 3P, 3S, 621H, 621K, 627B, 627E, 627F, 627G, 627H, 627K, 62...
3054C, 3054E, 315C, 414E, 416D, 416E, 420D, 420E, 422E, 424D, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 442D, 442E, 444E, 450E, 914G, AP-300, AP-300D, AP-650B, AP-800D, AP555E, BG500E, C4.4, CB-434D, ...
3054C, 3054E, 315C, 414E, 416D, 416E, 420D, 420E, 422E, 424D, 428D, 428E, 430D, 430E, 432D, 432E, 434E, 442D, 442E, 444E, 450E, 914G, AP-300, AP-650B, AP-800D, AP555E, BG500E, C4.4, CB-434D, CB-534D, ...
910G, 933C, C11, C13, C15, C18, C9, C9.3, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX35-C18I, CX35-P800, D3C III, D3K XL, D4G, D5G, D5K LGP, D5K2 XL, D6N, D6T, D6T LGP, D6T LGPPAT, D6T XL, PR-1000, ...
906H, 906H2, 907H, 907H2, 908H, 908H2, AP1000E, AP1055E, BG1000E, BG1055E, CP-56, CP-64, CP-76, CS-56, CS-64, CS-74, D3K2 LGP, D4K2 XL, D5R LGP, D6K, D6K LGP, D6K XL, D6K2 LGP, D6N, D6N LGP, D6N OEM, ...
311C, 315C, 315D L, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320N, 321B, 321C, 321D LCR, 322, 32...
215, 931, 931B, 931C, 933, 933C, AP-1055D, AP-650B, AP-655D, BG-225C, BG-245C, BG655D, D3, D3B, D3C, D3C II, D3C III, D3G, D3K XL, D3K2 LGP, D4C, D4C III, D4G, D4K XL, D4K2 XL, D5G, PR-450, PR-450C
931B, 931C, 931C II, AP-1055D, AP-650B, AP-655D, BG-225C, BG-245C, BG655D, D3B, D3C, D3C II, D3G, D3K XL, D3K2 LGP, D4C, D4C II, D4C III, D4G, D4K XL, D4K2 XL, D5G
D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL
515, 525, 525B, 525C, 535B, 535C, 545, 545C, D3G, D3K XL, D3K2 LGP, D4G, D4K XL, D4K2 XL, D5G, D5K LGP, D5K2 XL, D6K LGP
2540635
BEARING-IDLER
D5K LGP, D5K2 XL
D5K LGP, D5K2 XL
3761592
BEARING AS
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
2480732
BEARING AS-ROLLER
D3K XL, D4K XL, D5K LGP
D3K XL, D4K XL, D5K LGP
963D
1140341
BEARING-TAPERED ROLLER
631E, 631G, 637E, 637G, 963D
631E, 631G, 637E, 637G, 963D
1458447
BEARING AS
631E, 631G, 637E, 637G, 963D
631E, 631G, 637E, 637G, 963D
120K, 120M, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 130G, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 160H, 160H ES, 160H NA, 160K, 160M, 163H, 163H NA, D6R, D6R STD, D6T, D6T LGP, D6T LGPPAT
3891401
BEARING-IDLER
D4K XL
D4K XL
2364313
BEARING
D4K XL
D4K XL
2540634
BEARING-IDLER
D3K XL, D3K2 LGP, D4K XL, D4K2 XL
D3K XL, D3K2 LGP, D4K XL, D4K2 XL
2552130
BEARING
D3K XL, D4K XL, D5K LGP
D3K XL, D4K XL, D5K LGP
2552122
BEARING
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL
D3K XL, D3K2 LGP, D4K XL, D4K2 XL, D5K LGP, D5K2 XL