BEARING 2791333 - Caterpillar

Oil Filter (Pilot)
Illustration 1 g03506781The implement pilot oil filter is located at the rear of the machine. The implement pilot oil filter removes debris from the pilot oil for the implement solenoids.Shutoff Valve
Illustration 2 g03507027The shutoff valve is mounted on the right-hand side of the frame in front of the cab. The shutoff valve contains the implement lockout solenoid valve.Pilot Control Manifold
Illustration 3 g03506796The pilot control manifold is located at the service center near the rear of the machine. The control manifold directs pilot oil to the implement control valves.Hydraulic Tank
Illustration 4 g03506805The hydraulic tank is located between the engine and the radiator.Piston Pump (Implement and Steering)
Illustration 5 g03506815The implement and steering pump is located below the hydraulic tank. The implement and steering pump is a variable displacement axial piston pump.Oil Filter (Hydraulic Return)
Illustration 6 g03506823The hydraulic filter is located in front of the hydraulic tank. The oil filter removes debris from the hydraulic system.Steering Control Valve
Illustration 7 g03508657The steering control valve is mounted on the frame in front of the cab.Steering Cylinders
Illustration 8 g03508658the steering cylinders are mounted to the front axle.Secondary Steering Pump and Motor
Illustration 9 g03508659The secondary steering pump and motor are located in the front of the rear frame near the articulated hitch.Secondary Steering Switch
Illustration 10 g03509239The secondary steering switch is located in the front dash below the messenger display.Joystick Controls
Illustration 11 g03506995The joystick controls are located inside the cab on both sides of the seat for the operator. The joystick controls send an electrical signal to the solenoids of the hydraulic system.Implement Electronic Control Module (ECM)
Illustration 12 g03507167The implement ECM's are located inside the cab behind the seat for the operator.