BEARING 2990598 - Caterpillar

GRADE 2D Depth and Slope Capability
2D Elevation Indication Guidance - Supports a variety of guidance indicators centering around providing the operator with cut/fill values that indicate the work tool distance to grade based on the benched machine position and orientation.
Benching Elevation - Setting the reference elevation by moving the work tool focus point to the target elevation.
Transferring Machine Elevation via Touchpoint - Supports the ability to move the machine location and maintain the original elevation reference by completing a touch point routine on a fixed point.
Transferring Machine Elevation via Laser Reference - Supports the ability to move the machine location and maintain the original elevation reference by catching the laser reference signal.
Basic GRADE function buttons on joystick - Benching Elevation, Transferring Machine Elevation, Adjusting Elevation Offset, and Adjusting Slope functions can be utilized via the buttons on the joysticks.
Slope and Offset Memories - Supports a number of user-defined target slope and elevation offset memories that can be quickly utilized.
Mainfall Sections - Supports the capability define target sections or segments with various slopes and elevations.
In-Field Designs - Provides the ability to create a 2D design profiles through a variety input methods.
Preconfigured System - All GRADE dimensions and calibrations with the exception of work tool dimensions are completed at the factory.
GRADE with Assist Functionality - Interacts and displays the GRADE with Assist functionality with a 2D Benched Elevation.GRADE 3D Dual Global Navigation Satellite System (GNSS) Capability
3D Guidance - Supports a variety of guidance indicators centering around providing the operator with cut/fill values that indicate the work tool distance to grade based on the Global Navigation Satellite System (GNSS) machine position and orientation.
Navigate to Point - Supports on screen horizontal indicators to guide the operator in positioning the work tool over the target point.
Measure Mode - Supports measuring the position of points, distance between points, and the slope between points.
Elevation Offset Memories - Supports a number of defined target elevation offsets from the design surface.
Basic GRADE function buttons on joystick - Adjusting Elevation Offset and Recording Points can be completed using the buttons on the joysticks.
In-Field Designs - Provides the ability to create a 3D design surfaces through a variety input methods.
Record Points - Supports recording and tagging the GNSS location of the work tool focus in the Project data.
Preconfigured System - All GRADE dimensions and calibrations with the exception of work tool dimensions are completed at the factory.
GRADE with Assist Functionality - Interacts and displays the GRADE with Assist functionality with a 3D design surfaceNote: Single GNSS, Universal Total Station, and Directional Heading Sensor configurations are not supported at this time.Note: The system requires a new 3D design surface format that is saved as project files supported in Trimble Business Center HCE v3.80 or later.Note: Only Trimble SNRxxx and SNM940 radio modems are supported for GNSS corrections.The TD520 GRADE Display and EC520 Controller can be updated via the Web Interfaces within the on-machine TD520 GRADE Display using 5406728V00.SG6 file or using a generic service tablet with GRADE Web UI connected