BEARING AS-ROLLER 2D5173 - Caterpillar

"Default Group In Event Summary Page"
Illustration 1 g01707378
Setting the preference for the default for "Select a Group" (1) "Select a Group" drop-down menuThe default preference is "All Equipment" for the "Select a Group" drop-down menu (1). Other options will appear in this drop-down menu only when groups of documents have been created or you have been given access to groups of documents that were created by other users.If you select a group from the drop-down menu and you update your preferences, from that time forward the value in the "Select a Group" drop-down menu (1) in the "Event Summary" section of the "EquipmentManager Home" screen will default to the group that was selected on the "Set Your Preferences" screen. For example, if the preferences of "DocGrp" was chosen, Illustration 1 is an example of the "Event Summary" section of the "EquipmentManager Home" screen that will appear after the initial time.Also, EquipmentManager allows you to manage your equipment by an exception. There are three "Status" levels of events.Action (red) - The "Action" status indicates an event that is deemed of the highest importance. "Action" events should be given the most attention and "Action" events should be resolved first.Monitor (yellow) - The "Monitor" status indicates an event that should have attention, but this event does not require immediate resolution.Normal (green) - The "Normal" status indicates an event that is deemed least important of the actions that require attention or resolution."Date Format" and "Time Format" Preferences
The "Date Format" and the "Time Format" that are used to display all dates and times throughout EquipmentManager may be set to your preference.In the "Time Zone" drop-down menu, the time may be set to the time zone of your dealership, the time zone of the location of your equipment, or any other time zone.In the "Time Format" drop-down menu, the time may be viewed with the following options: "12 Hr Format", "12 Hr with AM/PM" and "24 Hour (Military Time)".In the "Daylight Savings" drop-down menu, the daylight savings time may be chosen.
Illustration 2 g01708096
Example of the "Date Format" and the "Time Format" (2) "Date/Time"The "Planned Maintenance" screen is an example that displays "Date/Time" (2) within EquipmentManager. Refer to Illustration 2."Location Display"
EquipmentManager uses GPS to determine the location (3) of your equipment. On the "Set Your Preferences" screen, you can choose to display the location in any one of the following three formats:
"Nearest City"
Illustration 3 g01708145
Format for the "Nearest C