BEARING A. 2F4885 - Caterpillar

Installation Procedure
Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
Illustration 1 g00908449
Position hydraulic pump (2) and gasket (3) to the machine before securing in place with bolts (1) and the washers.
Connect hoses (4) .
Fill the hydraulic oil tank with hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic Tank - Oil Change".End By:
Check the hydraulic tank oil level. Refer to Operation and Maintenance Manual, "Hydraulic Tank - Check Oil Level".
Close the door to the engine enclosure and secure the door in place with the latch.
Remove the prop that holds the hood in the raised position. Stow the hood correctly. Lower the hood and secure the hood in place with the latch.