BEARING A. 2F9323 - Caterpillar

Installation Procedure
Table 1
Required Parts    
Item     Qty     Part Number     Description    
1     1     221-3406     Pressure Sensor (Disc Saw)    
2     1     102-8803     Receptacle Kit    
3     1     3J-7354     O-Ring Seal    
1 4J-5477     O-Ring Seal    
1 6V-8647     Connector    
4     1     7X-2444     Swivel Tee    
1 4J-5477     O-Ring Seal    
5     1     229-2250     Tube As    
Park the machine.
Release the oil pressure in the hydraulic system.
Illustration 1 g00975605
Remove 155-3549 Pressure Sensor (Disc Saw) (1) .
Remove connector receptacle (2) from the wiring harness.
Replace connector receptacle (2) with Item (2) in Table 1.
Illustration 2 g00976308
New Connector Receptacle
Refer to Table 2 for wiring locations.
Table 2
Wiring Table    
Socket     Circuit     Wire    
A     Voltage Source     C985-BU-18    
B     Ground     201-BK-18    
C     Signal     A542-PK-18    
Illustration 3 g00975739
Replace the existing tube assembly and the tee assembly with connector assembly (3), tee assembly (4), and tube assembly (5). Refer to Table 1 for more information.
Install the new pressure sensor (1) .