BEARING 2H0757 - Caterpillar

Illustration 1 g01062540
The fittings are located on the front of the machine near the boom.
Illustration 2 g01051868
Apply lubricant through fittings (1) at the base of the boom cylinder.
Apply lubricant through fitting (2) in order to lubricate the right boom cylinder rod end.
Apply lubricant through fitting (4) in order to lubricate the left boom cylinder rod end.
Apply lubricant through fitting (3) in order to lubricate the stick cylinder head end.
Illustration 3 g01051890
Apply lubricant through fitting (5) on the bottom side of the stick in order to lubricate the connection point of the stick and the attachment.
Apply lubricant through fitting (6) on the bottom side of the stick in order to lubricate the connection point of the stick and the power link.
Apply lubricant through fittings (7), (9) and (10) on the bottom side of the stick in order to lubricate the stick pin.
Apply lubricant through fitting (8) on the bottom side of the stick in order to lubricate the stick cylinder rod end.
Illustration 4 g01051898
Apply lubricant through fittings (11) and (12) in order to lubricate the link pin.
Apply lubricant through fitting (13) in order to lubricate the rod end of the attachment cylinder.
Apply lubricant through fittings (14) and (15) in order to lubricate the power link.
Refer to the Operation and Maintenance Manual for the lubrication points on the felling head.