2V7857 BEARING Caterpillar parts
814B, 824C, 834B, 836, 950B, 966D, 980C
Rating:
Alternative (cross code) number:
CA2V7857
2V-7857
2V7857
CA2V7857
2V-7857
2V7857
Weight: 0.01 pounds 0 kg.
Information:
ID
41.8
mm
OD
50.8
mm
WIDTH
.762
mm
LANDFILL COMPACTOR, WHEEL LOADER,
Compatible equipment models: 2V7857:
Number on catalog scheme:
7
For full view, you need register
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00513507
Remove bolt (1) and breather cap (3) from valve mechanism cover (2). Remove the O-ring seal from breather cap (3) .
Remove bolts (4) and the washers that hold valve mechanism cover (2) in position. Remove valve mechanism cover (2) and the gasket.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the condition of the gasket and O-ring seals. If the gasket or the O-ring seals are worn or damaged, use new parts for replacement.
Illustration 2 g00513507
Install a new gasket for valve mechanism cover (2). Put valve mechanism cover (2) in position on the cylinder head.
Illustration 3 g00450791
Install the washers and bolts (4) that hold valve mechanism cover (2) in position. Tighten the bolts in a numerical sequence to a torque of 16 3 N m (12 2 lb in). Use the numerical sequence that is shown in illustration 3.
Put the O-ring seal and breather cap (3) in position. Install the washer and bolt (1). Tighten bolt (1) to a torque of 14 3 N m (10 2 lb ft).
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00513507
Remove bolt (1) and breather cap (3) from valve mechanism cover (2). Remove the O-ring seal from breather cap (3) .
Remove bolts (4) and the washers that hold valve mechanism cover (2) in position. Remove valve mechanism cover (2) and the gasket.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the condition of the gasket and O-ring seals. If the gasket or the O-ring seals are worn or damaged, use new parts for replacement.
Illustration 2 g00513507
Install a new gasket for valve mechanism cover (2). Put valve mechanism cover (2) in position on the cylinder head.
Illustration 3 g00450791
Install the washers and bolts (4) that hold valve mechanism cover (2) in position. Tighten the bolts in a numerical sequence to a torque of 16 3 N m (12 2 lb in). Use the numerical sequence that is shown in illustration 3.
Put the O-ring seal and breather cap (3) in position. Install the washer and bolt (1). Tighten bolt (1) to a torque of 14 3 N m (10 2 lb ft).
Caterpillar parts catalog:
Parts bearing Caterpillar catalog:
14G, 14H, 14H NA, 14M, 814, 815, 815B, 966C, 966D
24H, 24M, 824C, 826C, 950
12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 528, 528B, 530B, 950, 950B, 950B/950E
950B, 950B/950E
814B, 815B, 966D
814B, 815B, 966D
528B, 530B, 814B, 815B, 816B, 966D, 966F
824C, 824G, 824G II, 824H, 824K, 834B, 834G, 834H, 834K
814F II, 824S, 834B, 836
824B, 824C, 826C, 834B, 836
824C, 826C
7A, 7S, 814, 814B, 814F, 814F II, 816B, 816F, 816F II, D7F, D7G, D7G2, D7H
824C, 980C, AD40, AE40, D35C, D40D
980, 980B, 980C
7E7972
BEARING-TURBOCHARGER
980C, 980F
980C, 980F
325B, 980C, 980F
768B, 769, 834B, 836, 988B, 988F II, AD55
8R5702
BEARING-THRUST
994, 994D, 994F, 994H
994, 994D, 994F, 994H
950B, 950B/950E, 950F
3V0256
BEARING
814B, 815B, 816B, 824C, 826C, 950B, 966D, 966F, 980C, 980F
814B, 815B, 816B, 824C, 826C, 950B, 966D, 966F, 980C, 980F
3K1505
BEARING-SLEEVE
515, 525, 525B, 535B, 545, 815B, 824C, 825C, 826C, 950B, 966D, 980C, D10T, D10T2, D11T
515, 525, 525B, 535B, 545, 815B, 824C, 825C, 826C, 950B, 966D, 980C, D10T, D10T2, D11T
3V9863
BEARING
950B, 966D, 980C
950B, 966D, 980C